This is the latest recevied telemetry packets stored in our database for station/object SP5BS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757870624 | 485 Count | 192 Count | 0 Count | 3.68 VDC | 0.14 VDC |
| 1757869721 | 484 Count | 192 Count | 0 Count | 3.69 VDC | 0.14 VDC |
| 1757868904 | 483 Count | 192 Count | 0 Count | 3.69 VDC | 0.14 VDC |
| 1757868001 | 482 Count | 192 Count | 0 Count | 3.69 VDC | 0.14 VDC |
| 1757867120 | 481 Count | 192 Count | 0 Count | 3.7 VDC | 0.14 VDC |
| 1757866217 | 480 Count | 192 Count | 0 Count | 3.7 VDC | 0.14 VDC |
| 1757865314 | 479 Count | 192 Count | 0 Count | 3.7 VDC | 0.14 VDC |
| 1757864411 | 478 Count | 192 Count | 0 Count | 3.71 VDC | 0.14 VDC |
| 1757863508 | 477 Count | 192 Count | 0 Count | 3.7 VDC | 0.14 VDC |
| 1757862606 | 476 Count | 192 Count | 0 Count | 3.71 VDC | 0.14 VDC |
| 1757861703 | 475 Count | 192 Count | 0 Count | 3.7 VDC | 0.14 VDC |
| 1757860800 | 474 Count | 192 Count | 0 Count | 3.71 VDC | 0.14 VDC |
| 1757859919 | 473 Count | 192 Count | 0 Count | 3.73 VDC | 0.14 VDC |
| 1757859016 | 472 Count | 192 Count | 0 Count | 3.73 VDC | 0.14 VDC |
| 1757858114 | 471 Count | 192 Count | 0 Count | 3.74 VDC | 0.14 VDC |
| 1757857211 | 470 Count | 192 Count | 0 Count | 3.74 VDC | 0.14 VDC |
| 1757856308 | 469 Count | 192 Count | 0 Count | 3.74 VDC | 0.14 VDC |
| 1757855405 | 468 Count | 192 Count | 0 Count | 3.75 VDC | 0.14 VDC |
| 1757854502 | 467 Count | 192 Count | 0 Count | 3.74 VDC | 0.14 VDC |
| 1757853600 | 466 Count | 192 Count | 0 Count | 3.75 VDC | 0.14 VDC |
| 1757852719 | 465 Count | 192 Count | 0 Count | 3.76 VDC | 0.14 VDC |
| 1757851816 | 464 Count | 192 Count | 0 Count | 3.76 VDC | 0.14 VDC |
| 1757850913 | 463 Count | 192 Count | 0 Count | 3.76 VDC | 0.14 VDC |
| 1757850010 | 462 Count | 192 Count | 0 Count | 3.77 VDC | 0.14 VDC |
| 1757849108 | 461 Count | 192 Count | 0 Count | 3.77 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)