This is the latest recevied telemetry packets stored in our database for station/object TULLUGNG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1757545810 | 1592 | 0 | 0 | 0 | 0 |
| 1757545211 | 2058 | 0 | 0 | 0 | 0 |
| 1757526606 | 1548 | 0 | 0 | 0 | 0 |
| 1757526007 | 1866 | 0 | 0 | 0 | 0 |
| 1757517009 | 1538 | 0 | 0 | 0 | 0 |
| 1757515806 | 1561 | 0 | 0 | 0 | 0 |
| 1757481611 | 1387 | 0 | 0 | 0 | 0 |
| 1757481011 | 1390 | 0 | 0 | 0 | 0 |
| 1757480409 | 1394 | 0 | 0 | 0 | 0 |
| 1757479809 | 1397 | 0 | 0 | 0 | 0 |
| 1757479211 | 1401 | 0 | 0 | 0 | 0 |
| 1757478608 | 1403 | 0 | 0 | 0 | 0 |
| 1757478009 | 1406 | 0 | 0 | 0 | 0 |
| 1757477409 | 1407 | 0 | 0 | 0 | 0 |
| 1757476808 | 1408 | 0 | 0 | 0 | 0 |
| 1757476209 | 1407 | 0 | 0 | 0 | 0 |
| 1757475609 | 1406 | 0 | 0 | 0 | 0 |
| 1757475011 | 1403 | 0 | 0 | 0 | 0 |
| 1757474411 | 1401 | 0 | 0 | 0 | 0 |
| 1757473811 | 1399 | 0 | 0 | 0 | 0 |
| 1757473214 | 1395 | 0 | 0 | 0 | 0 |
| 1757472610 | 1391 | 0 | 0 | 0 | 0 |
| 1757472014 | 1386 | 0 | 0 | 0 | 0 |
| 1757464816 | 2058 | 0 | 0 | 0 | 0 |
| 1757464212 | 1832 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)