This is the latest recevied telemetry packets stored in our database for station/object TULLQUIR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753142404 | 3951 | 0 | 0 | 0 | 0 |
| 1753141804 | 3947 | 0 | 0 | 0 | 0 |
| 1753141205 | 3940 | 0 | 0 | 0 | 0 |
| 1753140604 | 3936 | 0 | 0 | 0 | 0 |
| 1753140004 | 3932 | 0 | 0 | 0 | 0 |
| 1753139405 | 3929 | 0 | 0 | 0 | 0 |
| 1753138808 | 3929 | 0 | 0 | 0 | 0 |
| 1753138204 | 3935 | 0 | 0 | 0 | 0 |
| 1753137607 | 3940 | 0 | 0 | 0 | 0 |
| 1753137008 | 3947 | 0 | 0 | 0 | 0 |
| 1753136404 | 3956 | 0 | 0 | 0 | 0 |
| 1753135805 | 3964 | 0 | 0 | 0 | 0 |
| 1753135204 | 3971 | 0 | 0 | 0 | 0 |
| 1753134605 | 3977 | 0 | 0 | 0 | 0 |
| 1753134004 | 3982 | 0 | 0 | 0 | 0 |
| 1753133405 | 3986 | 0 | 0 | 0 | 0 |
| 1753132807 | 3984 | 0 | 0 | 0 | 0 |
| 1753132207 | 3979 | 0 | 0 | 0 | 0 |
| 1753131604 | 3979 | 0 | 0 | 0 | 0 |
| 1753131005 | 3985 | 0 | 0 | 0 | 0 |
| 1753130405 | 3990 | 0 | 0 | 0 | 0 |
| 1753129805 | 3997 | 0 | 0 | 0 | 0 |
| 1753129205 | 4004 | 0 | 0 | 0 | 0 |
| 1753128609 | 4011 | 0 | 0 | 0 | 0 |
| 1753128005 | 4021 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)