This is the latest recevied telemetry packets stored in our database for station/object KC1VMZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769205434 | 4.53 VDC | 30.8 C | 15.68 % | 0 | 0 |
| 1769205350 | 4.53 VDC | 30.8 C | 15.74 % | 0 | 0 |
| 1769204902 | 4.53 VDC | 30.8 C | 15.78 % | 0 | 0 |
| 1769204719 | 4.53 VDC | 30.7 C | 16.01 % | 0 | 0 |
| 1769204645 | 4.53 VDC | 30.7 C | 15.88 % | 0 | 0 |
| 1769204622 | 4.54 VDC | 30.6 C | 15.89 % | 0 | 0 |
| 1769204331 | 4.52 VDC | 30.6 C | 15.93 % | 0 | 0 |
| 1769204109 | 4.53 VDC | 30.6 C | 15.96 % | 0 | 0 |
| 1769203906 | 4.53 VDC | 30.6 C | 16 % | 0 | 0 |
| 1769203836 | 4.53 VDC | 30.6 C | 16.15 % | 0 | 0 |
| 1769203571 | 4.53 VDC | 30.5 C | 16.08 % | 0 | 0 |
| 1769203451 | 4.53 VDC | 30.4 C | 16.19 % | 0 | 0 |
| 1769203421 | 4.53 VDC | 30.4 C | 16.19 % | 0 | 0 |
| 1769203398 | 4.53 VDC | 30.4 C | 16.15 % | 0 | 0 |
| 1769203364 | 4.53 VDC | 30.4 C | 16.15 % | 0 | 0 |
| 1769203329 | 4.52 VDC | 30.4 C | 16.19 % | 0 | 0 |
| 1769202639 | 4.53 VDC | 30.1 C | 16.43 % | 0 | 0 |
| 1769202516 | 4.53 VDC | 30 C | 16.51 % | 0 | 0 |
| 1769201915 | 4.53 VDC | 29.5 C | 16.39 % | 0 | 0 |
| 1769201807 | 4.53 VDC | 29.3 C | 16.48 % | 0 | 0 |
| 1769201754 | 4.53 VDC | 29.2 C | 16.5 % | 0 | 0 |
| 1769201691 | 4.53 VDC | 29.3 C | 16.48 % | 0 | 0 |
| 1769201410 | 4.52 VDC | 29.1 C | 16.61 % | 0 | 0 |
| 1769200507 | 4.53 VDC | 29.1 C | 15.91 % | 0 | 0 |
| 1769199604 | 4.53 VDC | 28.1 C | 17.04 % | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)