This is the latest recevied telemetry packets stored in our database for station/object DL1MBW-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1755121117 | 5 | 910 | 424 | 49 | 0 |
| 1755120958 | 5 | 910 | 430 | 51 | 0 |
| 1755120767 | 4 | 909 | 429 | 53 | 0 |
| 1755120406 | 5 | 907 | 430 | 54 | 0 |
| 1755120246 | 6 | 905 | 429 | 56 | 0 |
| 1755119756 | 6 | 901 | 430 | 57 | 0 |
| 1755119252 | 7 | 906 | 430 | 58 | 0 |
| 1755119092 | 8 | 908 | 430 | 63 | 0 |
| 1755118930 | 6 | 909 | 430 | 61 | 0 |
| 1755118770 | 8 | 910 | 430 | 60 | 0 |
| 1755116210 | 9 | 915 | 420 | 63 | 0 |
| 1755115887 | 7 | 911 | 430 | 60 | 0 |
| 1755115719 | 9 | 906 | 430 | 62 | 0 |
| 1755115556 | 8 | 903 | 429 | 65 | 0 |
| 1755113613 | 8 | 876 | 431 | 60 | 0 |
| 1755113452 | 7 | 873 | 430 | 62 | 0 |
| 1755113290 | 8 | 868 | 430 | 64 | 0 |
| 1755112808 | 7 | 852 | 430 | 73 | 0 |
| 1755112648 | 7 | 844 | 431 | 72 | 0 |
| 1755084838 | 8 | 953 | 430 | 65 | 0 |
| 1755084185 | 8 | 924 | 430 | 60 | 0 |
| 1755084017 | 8 | 914 | 429 | 63 | 0 |
| 1755082608 | 5 | 819 | 430 | 54 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)