This is the latest recevied telemetry packets stored in our database for station/object SP7TWA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1763875833 | 980 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763874932 | 979 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763874031 | 978 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763873131 | 977 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763872230 | 976 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763871329 | 975 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763870428 | 974 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763868644 | 972 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763867743 | 971 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763865041 | 968 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763864141 | 967 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763861438 | 964 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763860538 | 963 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763858736 | 961 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763857835 | 960 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763856934 | 959 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763856033 | 958 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763855132 | 957 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763854232 | 956 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763853331 | 955 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763852430 | 954 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763851529 | 953 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763850629 | 952 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763849728 | 951 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1763848827 | 950 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)