This is the latest recevied telemetry packets stored in our database for station/object EC5CIA-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761938809 | 0 Count | 533 Count | 0 Count | 0 VDC | 0 VDC |
| 1761937909 | 0 Count | 525 Count | 0 Count | 0 VDC | 0 VDC |
| 1761937009 | 0 Count | 520 Count | 0 Count | 0 VDC | 0 VDC |
| 1761936109 | 0 Count | 508 Count | 0 Count | 0 VDC | 0 VDC |
| 1761935209 | 0 Count | 500 Count | 0 Count | 0 VDC | 0 VDC |
| 1761934308 | 0 Count | 465 Count | 0 Count | 0 VDC | 0 VDC |
| 1761933408 | 0 Count | 456 Count | 0 Count | 0 VDC | 0 VDC |
| 1761932508 | 0 Count | 446 Count | 0 Count | 0 VDC | 0 VDC |
| 1761931608 | 0 Count | 434 Count | 0 Count | 0 VDC | 0 VDC |
| 1761930708 | 0 Count | 423 Count | 0 Count | 0 VDC | 0 VDC |
| 1761929808 | 0 Count | 412 Count | 0 Count | 0 VDC | 0 VDC |
| 1761928908 | 0 Count | 400 Count | 0 Count | 0 VDC | 0 VDC |
| 1761928008 | 0 Count | 395 Count | 0 Count | 0 VDC | 0 VDC |
| 1761927108 | 0 Count | 382 Count | 0 Count | 0 VDC | 0 VDC |
| 1761926208 | 0 Count | 377 Count | 0 Count | 0 VDC | 0 VDC |
| 1761925308 | 0 Count | 363 Count | 0 Count | 0 VDC | 0 VDC |
| 1761924408 | 0 Count | 355 Count | 0 Count | 0 VDC | 0 VDC |
| 1761923508 | 0 Count | 339 Count | 0 Count | 0 VDC | 0 VDC |
| 1761922608 | 0 Count | 301 Count | 0 Count | 0 VDC | 0 VDC |
| 1761921708 | 0 Count | 290 Count | 0 Count | 0 VDC | 0 VDC |
| 1761920808 | 0 Count | 286 Count | 0 Count | 0 VDC | 0 VDC |
| 1761919909 | 0 Count | 277 Count | 0 Count | 0 VDC | 0 VDC |
| 1761919008 | 0 Count | 273 Count | 0 Count | 0 VDC | 0 VDC |
| 1761918108 | 0 Count | 262 Count | 0 Count | 0 VDC | 0 VDC |
| 1761917209 | 0 Count | 258 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)