This is the latest recevied telemetry packets stored in our database for station/object S56BOT-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1757247104 | 41 | 0 | 0 | 0 | 0 |
| 1757245284 | 28 | 0 | 0 | 0 | 0 |
| 1757241663 | 41 | 0 | 0 | 0 | 0 |
| 1757240141 | 30 | 0 | 0 | 0 | 0 |
| 1757238318 | 29 | 0 | 0 | 0 | 0 |
| 1757236498 | 40 | 0 | 0 | 0 | 0 |
| 1757234676 | 39 | 0 | 0 | 0 | 0 |
| 1757232853 | 41 | 0 | 0 | 0 | 0 |
| 1757231029 | 33 | 0 | 0 | 0 | 0 |
| 1757229204 | 30 | 0 | 0 | 0 | 0 |
| 1757227380 | 30 | 0 | 0 | 0 | 0 |
| 1757225558 | 29 | 0 | 0 | 0 | 0 |
| 1757223738 | 29 | 0 | 0 | 0 | 0 |
| 1757221916 | 29 | 0 | 0 | 0 | 0 |
| 1757220093 | 30 | 0 | 0 | 0 | 0 |
| 1757218273 | 29 | 0 | 0 | 0 | 0 |
| 1757216451 | 29 | 0 | 0 | 0 | 0 |
| 1757214632 | 29 | 0 | 0 | 0 | 0 |
| 1757212809 | 29 | 0 | 0 | 0 | 0 |
| 1757210987 | 29 | 0 | 0 | 0 | 0 |
| 1757209167 | 29 | 0 | 0 | 0 | 0 |
| 1757207347 | 29 | 0 | 0 | 0 | 0 |
| 1757205523 | 29 | 0 | 0 | 0 | 0 |
| 1757203702 | 30 | 0 | 0 | 0 | 0 |
| 1757201882 | 29 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)