This is the latest recevied telemetry packets stored in our database for station/object EA1IPG-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 05/24/2025 3:14:31 PM+00:00 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 05/24/2025 12:44:01 PM+00:00 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 05/24/2025 10:13:31 AM+00:00 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 05/24/2025 8:11:42 AM+00:00 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 05/24/2025 8:02:56 AM+00:00 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 05/24/2025 6:23:30 AM+00:00 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 05/24/2025 5:49:53 AM+00:00 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 05/24/2025 5:45:45 AM+00:00 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 05/24/2025 5:40:37 AM+00:00 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 05/24/2025 5:36:42 AM+00:00 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 05/24/2025 4:19:13 AM+00:00 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 05/24/2025 1:48:43 AM+00:00 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 05/23/2025 11:18:13 PM+00:00 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 05/23/2025 10:29:55 PM+00:00 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 05/23/2025 9:18:52 PM+00:00 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 05/23/2025 8:27:51 PM+00:00 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 05/23/2025 7:55:11 PM+00:00 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 05/23/2025 6:58:01 PM+00:00 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 05/23/2025 6:40:27 PM+00:00 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 05/23/2025 5:49:55 PM+00:00 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 05/23/2025 5:44:27 PM+00:00 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 05/23/2025 4:59:02 PM+00:00 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 05/23/2025 4:52:39 PM+00:00 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 05/23/2025 4:47:27 PM+00:00 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 05/23/2025 4:38:12 PM+00:00 | 4.16 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)