This is the latest recevied telemetry packets stored in our database for station/object SQ9IDT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788935313 | 274 Count | 977 Count | 253 Count | 0 VDC | 0 VDC |
| 1788933500 | 253 Count | 932 Count | 233 Count | 0 VDC | 0 VDC |
| 1788931700 | 232 Count | 890 Count | 213 Count | 0 VDC | 0 VDC |
| 1788929915 | 216 Count | 835 Count | 202 Count | 0 VDC | 0 VDC |
| 1788928114 | 202 Count | 783 Count | 189 Count | 0 VDC | 0 VDC |
| 1788926313 | 132 Count | 628 Count | 120 Count | 0 VDC | 0 VDC |
| 1788924512 | 113 Count | 580 Count | 102 Count | 0 VDC | 0 VDC |
| 1788922712 | 101 Count | 522 Count | 91 Count | 0 VDC | 0 VDC |
| 1788920910 | 92 Count | 478 Count | 83 Count | 0 VDC | 0 VDC |
| 1788919110 | 83 Count | 438 Count | 75 Count | 0 VDC | 0 VDC |
| 1788917309 | 74 Count | 392 Count | 67 Count | 0 VDC | 0 VDC |
| 1788915508 | 65 Count | 341 Count | 59 Count | 0 VDC | 0 VDC |
| 1788913708 | 55 Count | 243 Count | 50 Count | 0 VDC | 0 VDC |
| 1788910106 | 37 Count | 150 Count | 34 Count | 0 VDC | 0 VDC |
| 1788908306 | 28 Count | 107 Count | 26 Count | 0 VDC | 0 VDC |
| 1788887765 | 105 Count | 611 Count | 94 Count | 0 VDC | 0 VDC |
| 1788887761 | 104 Count | 611 Count | 94 Count | 0 VDC | 0 VDC |
| 1788886296 | 98 Count | 540 Count | 89 Count | 0 VDC | 0 VDC |
| 1788884508 | 88 Count | 484 Count | 80 Count | 0 VDC | 0 VDC |
| 1788882708 | 80 Count | 406 Count | 73 Count | 0 VDC | 0 VDC |
| 1788880907 | 74 Count | 370 Count | 68 Count | 0 VDC | 0 VDC |
| 1788879106 | 66 Count | 332 Count | 61 Count | 0 VDC | 0 VDC |
| 1788877306 | 45 Count | 246 Count | 41 Count | 0 VDC | 0 VDC |
| 1788875505 | 37 Count | 182 Count | 34 Count | 0 VDC | 0 VDC |
| 1788873704 | 28 Count | 124 Count | 26 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)