This is the latest recevied telemetry packets stored in our database for station/object EB5CGD-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762075454 | 0 Count | 332 Count | 0 Count | 0 VDC | 0 VDC |
| 1762074434 | 0 Count | 330 Count | 0 Count | 0 VDC | 0 VDC |
| 1762073414 | 0 Count | 326 Count | 0 Count | 0 VDC | 0 VDC |
| 1762072394 | 0 Count | 287 Count | 0 Count | 0 VDC | 0 VDC |
| 1762071374 | 0 Count | 246 Count | 0 Count | 0 VDC | 0 VDC |
| 1762070354 | 0 Count | 226 Count | 0 Count | 0 VDC | 0 VDC |
| 1762069334 | 0 Count | 223 Count | 0 Count | 0 VDC | 0 VDC |
| 1762068314 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762067294 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762066274 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762065254 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762064234 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762063214 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762032261 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762031241 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762030221 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762029201 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762028181 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762027161 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762026141 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762025121 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762024101 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762023081 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762022061 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1762021041 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)