This is the latest recevied telemetry packets stored in our database for station/object 9M2FUL-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | TEMP* | HUM* | BARO* | BAT* | SAT* |
---|---|---|---|---|---|
1751287551 | 29.39 C | 40 % | 1007 hPa | 3.64 Volt | 41 Sat |
1751287545 | 29.39 C | 40 % | 1007 hPa | 3.64 Volt | 41 Sat |
1751287472 | 29.34 C | 40 % | 1007 hPa | 3.64 Volt | 39 Sat |
1751287439 | 29.32 C | 40 % | 1007 hPa | 3.65 Volt | 42 Sat |
1751287365 | 29.27 C | 41 % | 1007 hPa | 3.64 Volt | 41 Sat |
1751287352 | 29.26 C | 41 % | 1007 hPa | 3.65 Volt | 41 Sat |
1751287282 | 29.25 C | 41 % | 1007 hPa | 3.55 Volt | 43 Sat |
1751287264 | 29.25 C | 41 % | 1007 hPa | 3.56 Volt | 41 Sat |
1751287248 | 29.25 C | 41 % | 1007 hPa | 3.56 Volt | 41 Sat |
1751287234 | 29.25 C | 41 % | 1007 hPa | 3.66 Volt | 42 Sat |
1751287219 | 29.25 C | 41 % | 1007 hPa | 3.66 Volt | 42 Sat |
1751287202 | 29.25 C | 41 % | 1007 hPa | 3.65 Volt | 41 Sat |
1751287178 | 29.25 C | 41 % | 1007 hPa | 3.65 Volt | 41 Sat |
1751287145 | 29.26 C | 41 % | 1007 hPa | 3.65 Volt | 37 Sat |
1751287129 | 29.26 C | 41 % | 1007 hPa | 3.65 Volt | 37 Sat |
1751287111 | 29.26 C | 41 % | 1007 hPa | 3.65 Volt | 41 Sat |
1751287078 | 29.26 C | 41 % | 1007 hPa | 3.65 Volt | 42 Sat |
1751287015 | 29.24 C | 41 % | 1007 hPa | 3.65 Volt | 41 Sat |
1751286859 | 29.28 C | 40 % | 1007 hPa | 3.67 Volt | 41 Sat |
1751286848 | 29.28 C | 40 % | 1007 hPa | 3.67 Volt | 41 Sat |
1751286815 | 29.44 C | 41 % | 1007 hPa | 3.66 Volt | 40 Sat |
1751286749 | 29.5 C | 41 % | 1007 hPa | 3.65 Volt | 42 Sat |
1751286708 | 29.56 C | 41 % | 1007 hPa | 3.67 Volt | 42 Sat |
1751286678 | 29.59 C | 41 % | 1007 hPa | 3.67 Volt | 38 Sat |
1751286667 | 29.59 C | 41 % | 1007 hPa | 3.67 Volt | 38 Sat |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 1, 0
BARO: 0, 1, 0
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)