This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1760028994 | 51 Count | 49 Count | 32 Count | 4.33 VDC | 0 VDC |
| 1760027194 | 48 Count | 46 Count | 30 Count | 4.31 VDC | 0 VDC |
| 1760025401 | 41 Count | 39 Count | 24 Count | 4.29 VDC | 0 VDC |
| 1760023600 | 38 Count | 36 Count | 22 Count | 4.28 VDC | 0 VDC |
| 1760021799 | 35 Count | 33 Count | 20 Count | 4.33 VDC | 0 VDC |
| 1760019999 | 32 Count | 30 Count | 18 Count | 4.26 VDC | 0 VDC |
| 1760018198 | 29 Count | 27 Count | 16 Count | 4.34 VDC | 0 VDC |
| 1760016397 | 26 Count | 24 Count | 14 Count | 4.3 VDC | 0 VDC |
| 1760014597 | 23 Count | 21 Count | 12 Count | 4.29 VDC | 0 VDC |
| 1760012796 | 20 Count | 18 Count | 10 Count | 4.31 VDC | 0 VDC |
| 1760010995 | 17 Count | 15 Count | 8 Count | 4.28 VDC | 0 VDC |
| 1760009195 | 14 Count | 12 Count | 6 Count | 4.29 VDC | 0 VDC |
| 1760007394 | 11 Count | 9 Count | 4 Count | 4.27 VDC | 0 VDC |
| 1760005593 | 8 Count | 7 Count | 2 Count | 4.31 VDC | 0 VDC |
| 1760005451 | 7 Count | 7 Count | 2 Count | 4.28 VDC | 0 VDC |
| 1760005437 | 6 Count | 6 Count | 2 Count | 4.31 VDC | 0 VDC |
| 1760005311 | 5 Count | 5 Count | 2 Count | 4.29 VDC | 0 VDC |
| 1760004835 | 0 Count | 0 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1760004747 | 0 Count | 0 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1760004276 | 143 Count | 0 Count | 0 Count | 4.32 VDC | 0.14 VDC |
| 1760003986 | 142 Count | 0 Count | 0 Count | 4.33 VDC | 0.14 VDC |
| 1760003296 | 141 Count | 0 Count | 0 Count | 4.33 VDC | 0.14 VDC |
| 1760002597 | 140 Count | 0 Count | 0 Count | 4.32 VDC | 0.14 VDC |
| 1760001694 | 139 Count | 0 Count | 0 Count | 4.32 VDC | 0.14 VDC |
| 1760000791 | 138 Count | 0 Count | 0 Count | 4.31 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)