This is the latest recevied telemetry packets stored in our database for station/object HB9IMG. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785368773 | 791 Count | 467 Count | 459 Count | 0 VDC | 0 VDC |
| 1785363363 | 786 Count | 465 Count | 457 Count | 0 VDC | 0 VDC |
| 1785361560 | 784 Count | 464 Count | 456 Count | 0 VDC | 0 VDC |
| 1785359756 | 779 Count | 460 Count | 452 Count | 0 VDC | 0 VDC |
| 1785357953 | 775 Count | 457 Count | 449 Count | 0 VDC | 0 VDC |
| 1785356150 | 773 Count | 456 Count | 448 Count | 0 VDC | 0 VDC |
| 1785352587 | 759 Count | 448 Count | 440 Count | 0 VDC | 0 VDC |
| 1785350783 | 752 Count | 442 Count | 434 Count | 0 VDC | 0 VDC |
| 1785339957 | 722 Count | 418 Count | 410 Count | 0 VDC | 0 VDC |
| 1785336350 | 719 Count | 417 Count | 409 Count | 0 VDC | 0 VDC |
| 1785330979 | 711 Count | 416 Count | 408 Count | 0 VDC | 0 VDC |
| 1785329175 | 708 Count | 414 Count | 406 Count | 0 VDC | 0 VDC |
| 1785327372 | 706 Count | 413 Count | 405 Count | 0 VDC | 0 VDC |
| 1785325569 | 704 Count | 412 Count | 404 Count | 0 VDC | 0 VDC |
| 1785323765 | 702 Count | 411 Count | 403 Count | 0 VDC | 0 VDC |
| 1785321961 | 696 Count | 406 Count | 398 Count | 0 VDC | 0 VDC |
| 1785320157 | 692 Count | 403 Count | 395 Count | 0 VDC | 0 VDC |
| 1785318354 | 690 Count | 402 Count | 394 Count | 0 VDC | 0 VDC |
| 1785314747 | 686 Count | 400 Count | 392 Count | 0 VDC | 0 VDC |
| 1785312944 | 685 Count | 400 Count | 392 Count | 0 VDC | 0 VDC |
| 1785311140 | 684 Count | 399 Count | 392 Count | 0 VDC | 0 VDC |
| 1785309375 | 677 Count | 397 Count | 390 Count | 0 VDC | 0 VDC |
| 1785307571 | 671 Count | 392 Count | 385 Count | 0 VDC | 0 VDC |
| 1785305768 | 666 Count | 388 Count | 381 Count | 0 VDC | 0 VDC |
| 1785303964 | 660 Count | 383 Count | 376 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)