This is the latest recevied telemetry packets stored in our database for station/object PE1PNX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758015778 | 957 Count | 422 Count | 213 Count | 0 VDC | 0 VDC |
| 1758013974 | 956 Count | 420 Count | 213 Count | 0 VDC | 0 VDC |
| 1758012170 | 955 Count | 418 Count | 213 Count | 0 VDC | 0 VDC |
| 1758010367 | 954 Count | 416 Count | 213 Count | 0 VDC | 0 VDC |
| 1758008563 | 953 Count | 414 Count | 213 Count | 0 VDC | 0 VDC |
| 1758006759 | 952 Count | 412 Count | 213 Count | 0 VDC | 0 VDC |
| 1758004997 | 947 Count | 410 Count | 213 Count | 0 VDC | 0 VDC |
| 1758003193 | 946 Count | 408 Count | 213 Count | 0 VDC | 0 VDC |
| 1758001390 | 945 Count | 406 Count | 213 Count | 0 VDC | 0 VDC |
| 1757999586 | 944 Count | 405 Count | 213 Count | 0 VDC | 0 VDC |
| 1757997782 | 943 Count | 403 Count | 213 Count | 0 VDC | 0 VDC |
| 1757995979 | 942 Count | 401 Count | 213 Count | 0 VDC | 0 VDC |
| 1757994175 | 941 Count | 399 Count | 213 Count | 0 VDC | 0 VDC |
| 1757992371 | 940 Count | 397 Count | 213 Count | 0 VDC | 0 VDC |
| 1757990568 | 939 Count | 395 Count | 213 Count | 0 VDC | 0 VDC |
| 1757988764 | 938 Count | 393 Count | 213 Count | 0 VDC | 0 VDC |
| 1757986960 | 937 Count | 391 Count | 213 Count | 0 VDC | 0 VDC |
| 1757985156 | 936 Count | 389 Count | 213 Count | 0 VDC | 0 VDC |
| 1757983394 | 931 Count | 388 Count | 213 Count | 0 VDC | 0 VDC |
| 1757981590 | 930 Count | 386 Count | 213 Count | 0 VDC | 0 VDC |
| 1757979787 | 929 Count | 385 Count | 213 Count | 0 VDC | 0 VDC |
| 1757977983 | 928 Count | 384 Count | 213 Count | 0 VDC | 0 VDC |
| 1757976179 | 927 Count | 382 Count | 213 Count | 0 VDC | 0 VDC |
| 1757974376 | 926 Count | 380 Count | 213 Count | 0 VDC | 0 VDC |
| 1757972572 | 925 Count | 378 Count | 213 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)