This is the latest recevied telemetry packets stored in our database for station/object AD3I-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758673428 | 352 | 273 | 9 | 1 | 1 |
| 1758672783 | 356 | 271 | 10 | 1 | 1 |
| 1758672419 | 370 | 271 | 11 | 1 | 1 |
| 1758671823 | 406 | 279 | 11 | 1 | 1 |
| 1758671581 | 380 | 272 | 10 | 1 | 1 |
| 1758671227 | 354 | 274 | 10 | 1 | 1 |
| 1758670018 | 422 | 271 | 10 | 1 | 1 |
| 1758669782 | 416 | 259 | 10 | 1 | 1 |
| 1758669543 | 404 | 273 | 10 | 1 | 1 |
| 1758669421 | 422 | 267 | 10 | 1 | 1 |
| 1758669183 | 418 | 274 | 11 | 1 | 1 |
| 1758669062 | 428 | 278 | 11 | 1 | 1 |
| 1758668938 | 416 | 281 | 11 | 1 | 1 |
| 1758668820 | 438 | 275 | 11 | 1 | 1 |
| 1758668585 | 422 | 264 | 11 | 1 | 1 |
| 1758668462 | 416 | 273 | 11 | 1 | 1 |
| 1758668225 | 410 | 279 | 11 | 1 | 1 |
| 1758667858 | 424 | 266 | 11 | 1 | 1 |
| 1758667746 | 426 | 277 | 11 | 1 | 1 |
| 1758667626 | 412 | 279 | 11 | 1 | 1 |
| 1758667497 | 414 | 275 | 11 | 1 | 1 |
| 1758667266 | 414 | 276 | 11 | 1 | 1 |
| 1758667018 | 436 | 282 | 10 | 1 | 1 |
| 1758666901 | 430 | 269 | 10 | 1 | 1 |
| 1758666542 | 434 | 274 | 11 | 1 | 1 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)