This is the latest recevied telemetry packets stored in our database for station/object 2E0LXY-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783272551 | 2 Count | 14 Count | 1 Count | 0 VDC | 0 VDC |
| 1783271948 | 764 Count | 1003 Count | 155 Count | 0 VDC | 0 VDC |
| 1783271345 | 760 Count | 988 Count | 153 Count | 0 VDC | 0 VDC |
| 1783270741 | 753 Count | 961 Count | 149 Count | 0 VDC | 0 VDC |
| 1783270138 | 737 Count | 942 Count | 146 Count | 0 VDC | 0 VDC |
| 1783269534 | 730 Count | 915 Count | 143 Count | 0 VDC | 0 VDC |
| 1783268931 | 725 Count | 902 Count | 140 Count | 0 VDC | 0 VDC |
| 1783268328 | 720 Count | 889 Count | 140 Count | 0 VDC | 0 VDC |
| 1783267728 | 714 Count | 875 Count | 137 Count | 0 VDC | 0 VDC |
| 1783267120 | 709 Count | 859 Count | 133 Count | 0 VDC | 0 VDC |
| 1783266517 | 705 Count | 846 Count | 130 Count | 0 VDC | 0 VDC |
| 1783265913 | 700 Count | 827 Count | 128 Count | 0 VDC | 0 VDC |
| 1783265448 | 689 Count | 814 Count | 127 Count | 0 VDC | 0 VDC |
| 1783264844 | 663 Count | 789 Count | 118 Count | 0 VDC | 0 VDC |
| 1783264241 | 642 Count | 772 Count | 114 Count | 0 VDC | 0 VDC |
| 1783263637 | 625 Count | 749 Count | 111 Count | 0 VDC | 0 VDC |
| 1783263033 | 609 Count | 734 Count | 109 Count | 0 VDC | 0 VDC |
| 1783262430 | 594 Count | 720 Count | 108 Count | 0 VDC | 0 VDC |
| 1783261826 | 578 Count | 705 Count | 105 Count | 0 VDC | 0 VDC |
| 1783261222 | 564 Count | 691 Count | 104 Count | 0 VDC | 0 VDC |
| 1783260619 | 544 Count | 668 Count | 101 Count | 0 VDC | 0 VDC |
| 1783260015 | 527 Count | 658 Count | 99 Count | 0 VDC | 0 VDC |
| 1783259412 | 511 Count | 644 Count | 95 Count | 0 VDC | 0 VDC |
| 1783258808 | 491 Count | 631 Count | 93 Count | 0 VDC | 0 VDC |
| 1783258205 | 476 Count | 614 Count | 93 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)