This is the latest recevied telemetry packets stored in our database for station/object SR9EMP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761972363 | 57 Count | 457 Count | 56 Count | 4.03 VDC | 0 VDC |
| 1761970562 | 26 Count | 224 Count | 26 Count | 4.03 VDC | 0 VDC |
| 1761968761 | 130 Count | 1034 Count | 121 Count | 4.03 VDC | 0 VDC |
| 1761966961 | 96 Count | 778 Count | 88 Count | 4.03 VDC | 0 VDC |
| 1761965160 | 70 Count | 531 Count | 63 Count | 4.03 VDC | 0 VDC |
| 1761963359 | 39 Count | 279 Count | 33 Count | 4.03 VDC | 0 VDC |
| 1761961558 | 3 Count | 1 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1761957978 | 146 Count | 780 Count | 138 Count | 4.01 VDC | 0 VDC |
| 1761956169 | 120 Count | 623 Count | 115 Count | 4.01 VDC | 0 VDC |
| 1761954368 | 89 Count | 461 Count | 86 Count | 4.01 VDC | 0 VDC |
| 1761952565 | 59 Count | 291 Count | 57 Count | 4.02 VDC | 0 VDC |
| 1761950764 | 33 Count | 161 Count | 33 Count | 4.01 VDC | 0 VDC |
| 1761948964 | 198 Count | 1136 Count | 185 Count | 4.01 VDC | 0 VDC |
| 1761947163 | 162 Count | 946 Count | 150 Count | 4.01 VDC | 0 VDC |
| 1761945362 | 133 Count | 773 Count | 124 Count | 4.01 VDC | 0 VDC |
| 1761943559 | 106 Count | 608 Count | 98 Count | 4.01 VDC | 0 VDC |
| 1761941758 | 69 Count | 406 Count | 62 Count | 4.02 VDC | 0 VDC |
| 1761939957 | 27 Count | 152 Count | 24 Count | 4.01 VDC | 0 VDC |
| 1761938182 | 174 Count | 1095 Count | 160 Count | 4.02 VDC | 0 VDC |
| 1761936381 | 129 Count | 917 Count | 117 Count | 4.02 VDC | 0 VDC |
| 1761934580 | 88 Count | 619 Count | 82 Count | 4.01 VDC | 0 VDC |
| 1761932779 | 55 Count | 369 Count | 52 Count | 4.02 VDC | 0 VDC |
| 1761930978 | 24 Count | 169 Count | 24 Count | 4.02 VDC | 0 VDC |
| 1761929178 | 181 Count | 1086 Count | 170 Count | 4.01 VDC | 0 VDC |
| 1761927377 | 159 Count | 942 Count | 149 Count | 4.02 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)