This is the latest recevied telemetry packets stored in our database for station/object SQ5CZL-16. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1750696937 | 337 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750685811 | 336 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750685687 | 335 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750685564 | 334 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750685441 | 333 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750685382 | 332 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750685259 | 331 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750685136 | 330 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750685013 | 329 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750684890 | 328 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750684767 | 327 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750684093 | 326 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750683970 | 325 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750683847 | 324 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750683724 | 323 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750683464 | 322 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750683341 | 321 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750683233 | 320 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750683110 | 319 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750682988 | 318 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750682864 | 317 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750682741 | 316 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750682617 | 315 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750682494 | 314 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1750682371 | 313 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)