This is the latest recevied telemetry packets stored in our database for station/object IU2RPR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Volt Aux* | Ampere Aux* |
|---|---|---|---|---|---|
| 1765970588 | 4 Pkt/10m | 0 Pkt/10m | 4.06 Volt | 4.1 Volt | 0.06 Ampere |
| 1765968787 | 4 Pkt/10m | 0 Pkt/10m | 4.06 Volt | 4.1 Volt | 0.07 Ampere |
| 1765966986 | 4 Pkt/10m | 0 Pkt/10m | 4 Volt | 4 Volt | -0.02 Ampere |
| 1765965185 | 5 Pkt/10m | 0 Pkt/10m | 4 Volt | 4 Volt | -0.01 Ampere |
| 1765963383 | 7 Pkt/10m | 0 Pkt/10m | 4 Volt | 4 Volt | -0.01 Ampere |
| 1765961582 | 2 Pkt/10m | 0 Pkt/10m | 4.04 Volt | 4.1 Volt | 0.08 Ampere |
| 1765959781 | 1 Pkt/10m | 0 Pkt/10m | 4.04 Volt | 4.1 Volt | 0.08 Ampere |
| 1765957980 | 5 Pkt/10m | 0 Pkt/10m | 4.04 Volt | 4.1 Volt | 0.09 Ampere |
| 1765956179 | 3 Pkt/10m | 0 Pkt/10m | 4 Volt | 4 Volt | 0.04 Ampere |
| 1765954377 | 5 Pkt/10m | 0 Pkt/10m | 4.02 Volt | 4 Volt | 0.09 Ampere |
| 1765952577 | 12 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 4 Volt | 0.04 Ampere |
| 1765950770 | 4 Pkt/10m | 0 Pkt/10m | 4 Volt | 4 Volt | 0.1 Ampere |
| 1765948969 | 2 Pkt/10m | 0 Pkt/10m | 3.92 Volt | 3.9 Volt | 0.01 Ampere |
| 1765947168 | 1 Pkt/10m | 0 Pkt/10m | 3.92 Volt | 3.9 Volt | 0 Ampere |
| 1765945366 | 5 Pkt/10m | 0 Pkt/10m | 3.9 Volt | 3.9 Volt | -0.07 Ampere |
| 1765943565 | 2 Pkt/10m | 0 Pkt/10m | 3.9 Volt | 3.9 Volt | -0.06 Ampere |
| 1765941764 | 5 Pkt/10m | 0 Pkt/10m | 3.9 Volt | 3.9 Volt | -0.07 Ampere |
| 1765939963 | 4 Pkt/10m | 0 Pkt/10m | 3.9 Volt | 3.9 Volt | -0.07 Ampere |
| 1765938162 | 3 Pkt/10m | 0 Pkt/10m | 3.92 Volt | 3.9 Volt | -0.07 Ampere |
| 1765936360 | 2 Pkt/10m | 0 Pkt/10m | 3.94 Volt | 4 Volt | -0.06 Ampere |
| 1765934559 | 1 Pkt/10m | 0 Pkt/10m | 3.94 Volt | 4 Volt | -0.07 Ampere |
| 1765932758 | 1 Pkt/10m | 0 Pkt/10m | 3.94 Volt | 4 Volt | -0.07 Ampere |
| 1765930957 | 3 Pkt/10m | 0 Pkt/10m | 4.06 Volt | 4.1 Volt | 0.09 Ampere |
| 1765929155 | 3 Pkt/10m | 0 Pkt/10m | 4.06 Volt | 4.1 Volt | 0.08 Ampere |
| 1765927354 | 2 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 4 Volt | 0.03 Ampere |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Volt Aux: 0, 0.1, 0
Ampere Aux: 0, 0.01, -1.27
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)