This is the latest recevied telemetry packets stored in our database for station/object SQ2BNY-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1750535257 | 104 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1750533455 | 103 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1750531652 | 102 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1750529849 | 101 Count | 0 Count | 0 Count | 4.12 VDC | 0.14 VDC |
| 1750528046 | 100 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1750526244 | 99 Count | 0 Count | 0 Count | 4.13 VDC | 0.14 VDC |
| 1750524441 | 98 Count | 0 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1750522638 | 97 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1750520835 | 96 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1750519065 | 95 Count | 0 Count | 0 Count | 4.13 VDC | 0.14 VDC |
| 1750517262 | 94 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1750515459 | 93 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1750513656 | 92 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1750511854 | 91 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1750510051 | 90 Count | 0 Count | 0 Count | 4.13 VDC | 0.14 VDC |
| 1750508248 | 89 Count | 0 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1750506445 | 88 Count | 0 Count | 0 Count | 4.12 VDC | 0.14 VDC |
| 1750504643 | 87 Count | 0 Count | 0 Count | 4.16 VDC | 0.14 VDC |
| 1750502840 | 86 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1750501037 | 85 Count | 0 Count | 0 Count | 4.13 VDC | 0.14 VDC |
| 1750499234 | 84 Count | 0 Count | 0 Count | 4.1 VDC | 0.14 VDC |
| 1750497464 | 83 Count | 0 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1750495661 | 82 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1750493858 | 81 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1750492056 | 80 Count | 0 Count | 0 Count | 4.16 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)