This is the latest recevied telemetry packets stored in our database for station/object F5ZZW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777375572 | 439 Count | 775 Count | 354 Count | 0 VDC | 0 VDC |
| 1777374966 | 431 Count | 758 Count | 348 Count | 0 VDC | 0 VDC |
| 1777374360 | 424 Count | 744 Count | 342 Count | 0 VDC | 0 VDC |
| 1777373754 | 412 Count | 726 Count | 332 Count | 0 VDC | 0 VDC |
| 1777373147 | 406 Count | 713 Count | 328 Count | 0 VDC | 0 VDC |
| 1777372538 | 394 Count | 697 Count | 321 Count | 0 VDC | 0 VDC |
| 1777372163 | 391 Count | 689 Count | 319 Count | 0 VDC | 0 VDC |
| 1777371557 | 384 Count | 678 Count | 313 Count | 0 VDC | 0 VDC |
| 1777370951 | 375 Count | 663 Count | 307 Count | 0 VDC | 0 VDC |
| 1777370345 | 363 Count | 645 Count | 296 Count | 0 VDC | 0 VDC |
| 1777369737 | 351 Count | 626 Count | 285 Count | 0 VDC | 0 VDC |
| 1777369131 | 346 Count | 615 Count | 281 Count | 0 VDC | 0 VDC |
| 1777368524 | 339 Count | 598 Count | 275 Count | 0 VDC | 0 VDC |
| 1777367918 | 332 Count | 578 Count | 270 Count | 0 VDC | 0 VDC |
| 1777367312 | 323 Count | 561 Count | 263 Count | 0 VDC | 0 VDC |
| 1777366706 | 314 Count | 544 Count | 256 Count | 0 VDC | 0 VDC |
| 1777366097 | 307 Count | 528 Count | 250 Count | 0 VDC | 0 VDC |
| 1777365490 | 298 Count | 507 Count | 243 Count | 0 VDC | 0 VDC |
| 1777364884 | 292 Count | 490 Count | 240 Count | 0 VDC | 0 VDC |
| 1777364278 | 285 Count | 472 Count | 235 Count | 0 VDC | 0 VDC |
| 1777363672 | 282 Count | 457 Count | 233 Count | 0 VDC | 0 VDC |
| 1777363066 | 273 Count | 435 Count | 226 Count | 0 VDC | 0 VDC |
| 1777362459 | 269 Count | 418 Count | 224 Count | 0 VDC | 0 VDC |
| 1777361853 | 262 Count | 401 Count | 219 Count | 0 VDC | 0 VDC |
| 1777361247 | 255 Count | 384 Count | 214 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)