This is the latest recevied telemetry packets stored in our database for station/object EA2FAW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768844671 | 428 | 36 | 0 | 0 | 0 |
| 1768843770 | 429 | 46 | 0 | 0 | 0 |
| 1768842870 | 428 | 46 | 0 | 0 | 0 |
| 1768841970 | 430 | 36 | 0 | 0 | 0 |
| 1768841070 | 429 | 35 | 0 | 0 | 0 |
| 1768840170 | 428 | 46 | 0 | 0 | 0 |
| 1768839269 | 428 | 46 | 0 | 0 | 0 |
| 1768838369 | 429 | 35 | 0 | 0 | 0 |
| 1768837469 | 428 | 46 | 0 | 0 | 0 |
| 1768836569 | 427 | 46 | 0 | 0 | 0 |
| 1768835668 | 427 | 36 | 0 | 0 | 0 |
| 1768834768 | 429 | 46 | 0 | 0 | 0 |
| 1768833868 | 428 | 46 | 0 | 0 | 0 |
| 1768832968 | 428 | 39 | 0 | 0 | 0 |
| 1768832066 | 427 | 45 | 0 | 0 | 0 |
| 1768831166 | 429 | 37 | 0 | 0 | 0 |
| 1768830266 | 429 | 46 | 0 | 0 | 0 |
| 1768829366 | 428 | 35 | 0 | 0 | 0 |
| 1768828466 | 429 | 36 | 0 | 0 | 0 |
| 1768827565 | 428 | 45 | 0 | 0 | 0 |
| 1768826665 | 429 | 45 | 0 | 0 | 0 |
| 1768825765 | 427 | 36 | 0 | 0 | 0 |
| 1768824865 | 428 | 46 | 0 | 0 | 0 |
| 1768823964 | 427 | 46 | 0 | 0 | 0 |
| 1768823064 | 427 | 37 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)