This is the latest recevied telemetry packets stored in our database for station/object IU5RCJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778621951 | 297 Count | 67 Count | 31 Count | 0 VDC | 0 VDC |
| 1778621048 | 264 Count | 59 Count | 27 Count | 0 VDC | 0 VDC |
| 1778620238 | 246 Count | 55 Count | 27 Count | 0 VDC | 0 VDC |
| 1778619335 | 220 Count | 51 Count | 24 Count | 0 VDC | 0 VDC |
| 1778618431 | 185 Count | 48 Count | 23 Count | 0 VDC | 0 VDC |
| 1778617527 | 161 Count | 44 Count | 21 Count | 0 VDC | 0 VDC |
| 1778616623 | 139 Count | 37 Count | 19 Count | 0 VDC | 0 VDC |
| 1778615720 | 108 Count | 25 Count | 12 Count | 0 VDC | 0 VDC |
| 1778614816 | 88 Count | 20 Count | 9 Count | 0 VDC | 0 VDC |
| 1778613911 | 66 Count | 15 Count | 7 Count | 0 VDC | 0 VDC |
| 1778613008 | 46 Count | 13 Count | 6 Count | 0 VDC | 0 VDC |
| 1778612104 | 20 Count | 5 Count | 2 Count | 0 VDC | 0 VDC |
| 1778611200 | 1018 Count | 153 Count | 62 Count | 0 VDC | 0 VDC |
| 1778610297 | 997 Count | 150 Count | 61 Count | 0 VDC | 0 VDC |
| 1778609393 | 977 Count | 147 Count | 60 Count | 0 VDC | 0 VDC |
| 1778608490 | 958 Count | 143 Count | 58 Count | 0 VDC | 0 VDC |
| 1778607586 | 932 Count | 139 Count | 55 Count | 0 VDC | 0 VDC |
| 1778606682 | 902 Count | 136 Count | 54 Count | 0 VDC | 0 VDC |
| 1778605778 | 864 Count | 134 Count | 53 Count | 0 VDC | 0 VDC |
| 1778604875 | 811 Count | 129 Count | 48 Count | 0 VDC | 0 VDC |
| 1778603968 | 780 Count | 127 Count | 47 Count | 0 VDC | 0 VDC |
| 1778603064 | 759 Count | 124 Count | 46 Count | 0 VDC | 0 VDC |
| 1778602161 | 733 Count | 119 Count | 45 Count | 0 VDC | 0 VDC |
| 1778601257 | 706 Count | 117 Count | 43 Count | 0 VDC | 0 VDC |
| 1778600351 | 690 Count | 107 Count | 42 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)