This is the latest recevied telemetry packets stored in our database for station/object SQ9IDT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774454327 | 118 Count | 661 Count | 114 Count | 0 VDC | 0 VDC |
| 1774452527 | 84 Count | 536 Count | 81 Count | 0 VDC | 0 VDC |
| 1774450726 | 60 Count | 407 Count | 58 Count | 0 VDC | 0 VDC |
| 1774448925 | 34 Count | 280 Count | 33 Count | 0 VDC | 0 VDC |
| 1774447125 | 15 Count | 188 Count | 15 Count | 0 VDC | 0 VDC |
| 1774445324 | 194 Count | 1090 Count | 185 Count | 0 VDC | 0 VDC |
| 1774441723 | 155 Count | 798 Count | 148 Count | 0 VDC | 0 VDC |
| 1774439922 | 138 Count | 689 Count | 132 Count | 0 VDC | 0 VDC |
| 1774438127 | 116 Count | 599 Count | 111 Count | 0 VDC | 0 VDC |
| 1774436321 | 96 Count | 507 Count | 92 Count | 0 VDC | 0 VDC |
| 1774434520 | 77 Count | 419 Count | 74 Count | 0 VDC | 0 VDC |
| 1774432720 | 55 Count | 320 Count | 53 Count | 0 VDC | 0 VDC |
| 1774430919 | 34 Count | 202 Count | 33 Count | 0 VDC | 0 VDC |
| 1774429119 | 17 Count | 90 Count | 17 Count | 0 VDC | 0 VDC |
| 1774427317 | 171 Count | 1062 Count | 159 Count | 0 VDC | 0 VDC |
| 1774425516 | 151 Count | 938 Count | 140 Count | 0 VDC | 0 VDC |
| 1774423716 | 133 Count | 844 Count | 123 Count | 0 VDC | 0 VDC |
| 1774421915 | 115 Count | 723 Count | 106 Count | 0 VDC | 0 VDC |
| 1774420114 | 97 Count | 574 Count | 89 Count | 0 VDC | 0 VDC |
| 1774418314 | 78 Count | 467 Count | 71 Count | 0 VDC | 0 VDC |
| 1774416513 | 60 Count | 347 Count | 54 Count | 0 VDC | 0 VDC |
| 1774414712 | 41 Count | 225 Count | 36 Count | 0 VDC | 0 VDC |
| 1774412912 | 22 Count | 122 Count | 18 Count | 0 VDC | 0 VDC |
| 1774411127 | 213 Count | 1038 Count | 203 Count | 0 VDC | 0 VDC |
| 1774409326 | 191 Count | 898 Count | 182 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)