This is the latest recevied telemetry packets stored in our database for station/object WB8ELK-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749932898 | 506 | 282 | 12 | 1 | 1 |
| 1749932777 | 506 | 277 | 12 | 1 | 1 |
| 1749932659 | 508 | 272 | 12 | 1 | 1 |
| 1749932534 | 506 | 268 | 12 | 1 | 1 |
| 1749932418 | 508 | 264 | 12 | 1 | 1 |
| 1749932298 | 508 | 260 | 12 | 1 | 1 |
| 1749932176 | 506 | 255 | 12 | 1 | 1 |
| 1749932058 | 508 | 252 | 12 | 1 | 1 |
| 1749931936 | 506 | 250 | 12 | 1 | 1 |
| 1749931818 | 506 | 251 | 12 | 1 | 1 |
| 1749931765 | 508 | 257 | 12 | 1 | 1 |
| 1749931698 | 506 | 253 | 12 | 1 | 1 |
| 1749931574 | 508 | 257 | 12 | 1 | 1 |
| 1749931464 | 506 | 261 | 12 | 1 | 1 |
| 1749931221 | 506 | 268 | 12 | 1 | 1 |
| 1749930976 | 508 | 270 | 12 | 1 | 1 |
| 1749930857 | 508 | 269 | 12 | 1 | 1 |
| 1749930735 | 506 | 268 | 12 | 1 | 1 |
| 1749930617 | 508 | 268 | 12 | 1 | 1 |
| 1749930495 | 508 | 267 | 12 | 1 | 1 |
| 1749930375 | 508 | 266 | 12 | 1 | 1 |
| 1749930308 | 506 | 258 | 12 | 1 | 1 |
| 1749930258 | 508 | 266 | 12 | 1 | 1 |
| 1749930187 | 506 | 258 | 12 | 1 | 1 |
| 1749930135 | 508 | 265 | 12 | 1 | 1 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)