This is the latest recevied telemetry packets stored in our database for station/object SP2SGL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773422546 | 136 Count | 189 Count | 124 Count | 0 VDC | 0 VDC |
| 1773420745 | 128 Count | 176 Count | 117 Count | 0 VDC | 0 VDC |
| 1773418944 | 119 Count | 162 Count | 109 Count | 0 VDC | 0 VDC |
| 1773417143 | 105 Count | 142 Count | 96 Count | 0 VDC | 0 VDC |
| 1773415343 | 97 Count | 128 Count | 89 Count | 0 VDC | 0 VDC |
| 1773413542 | 87 Count | 116 Count | 80 Count | 0 VDC | 0 VDC |
| 1773411749 | 67 Count | 93 Count | 61 Count | 0 VDC | 0 VDC |
| 1773409949 | 58 Count | 82 Count | 53 Count | 0 VDC | 0 VDC |
| 1773408149 | 47 Count | 66 Count | 43 Count | 0 VDC | 0 VDC |
| 1773406347 | 37 Count | 51 Count | 34 Count | 0 VDC | 0 VDC |
| 1773404547 | 23 Count | 34 Count | 21 Count | 0 VDC | 0 VDC |
| 1773402746 | 16 Count | 24 Count | 15 Count | 0 VDC | 0 VDC |
| 1773400945 | 8 Count | 13 Count | 8 Count | 0 VDC | 0 VDC |
| 1773399144 | 762 Count | 1022 Count | 697 Count | 0 VDC | 0 VDC |
| 1773397343 | 737 Count | 991 Count | 673 Count | 0 VDC | 0 VDC |
| 1773395543 | 692 Count | 943 Count | 629 Count | 0 VDC | 0 VDC |
| 1773393742 | 675 Count | 921 Count | 613 Count | 0 VDC | 0 VDC |
| 1773391941 | 650 Count | 890 Count | 589 Count | 0 VDC | 0 VDC |
| 1773390149 | 638 Count | 872 Count | 578 Count | 0 VDC | 0 VDC |
| 1773388348 | 625 Count | 852 Count | 566 Count | 0 VDC | 0 VDC |
| 1773386547 | 594 Count | 816 Count | 536 Count | 0 VDC | 0 VDC |
| 1773384747 | 583 Count | 801 Count | 526 Count | 0 VDC | 0 VDC |
| 1773382946 | 571 Count | 783 Count | 515 Count | 0 VDC | 0 VDC |
| 1773381145 | 566 Count | 776 Count | 511 Count | 0 VDC | 0 VDC |
| 1773379344 | 560 Count | 769 Count | 506 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)