This is the latest recevied telemetry packets stored in our database for station/object W6SRR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | PC Board* | CPU* | Ambient* | Value5* |
|---|---|---|---|---|---|
| 1751704313 | 1354 | 82.1 | 38.1 | 75.8 | 0 |
| 1751703408 | 1354 | 82.2 | 38.6 | 76 | 0 |
| 1751702510 | 1356 | 82.5 | 38.6 | 76.2 | 0 |
| 1751701607 | 1356 | 82.7 | 38.6 | 76.4 | 0 |
| 1751700710 | 1353 | 82.8 | 38.6 | 76.7 | 0 |
| 1751699809 | 1356 | 83.1 | 38.6 | 76.9 | 0 |
| 1751698911 | 1354 | 83.1 | 38.6 | 76.9 | 0 |
| 1751698008 | 1354 | 83.3 | 38.6 | 77.1 | 0 |
| 1751697110 | 1356 | 83.4 | 39.7 | 77.2 | 0 |
| 1751696209 | 1354 | 83.5 | 39.2 | 77.3 | 0 |
| 1751695309 | 1353 | 83.6 | 39.2 | 77.4 | 0 |
| 1751694407 | 1356 | 83.8 | 39.2 | 77.6 | 0 |
| 1751693509 | 1356 | 83.9 | 39.2 | 77.7 | 0 |
| 1751692609 | 1354 | 84 | 39.2 | 77.8 | 0 |
| 1751691710 | 1356 | 84.2 | 39.2 | 77.9 | 0 |
| 1751690808 | 1360 | 84.4 | 39.2 | 78.1 | 0 |
| 1751689910 | 1358 | 84.5 | 39.7 | 78.4 | 0 |
| 1751689009 | 1353 | 84.8 | 39.7 | 78.5 | 0 |
| 1751688110 | 1354 | 84.9 | 39.7 | 78.6 | 0 |
| 1751687207 | 1356 | 85 | 39.2 | 78.7 | 0 |
| 1751686309 | 1353 | 85.1 | 39.7 | 78.7 | 0 |
| 1751685408 | 1356 | 85.3 | 40.2 | 78.8 | 0 |
| 1751684510 | 1356 | 85.4 | 39.7 | 78.8 | 0 |
| 1751683607 | 1342 | 85.6 | 39.7 | 78.9 | 0 |
| 1751682710 | 1356 | 85.7 | 39.7 | 79 | 0 |
*Used Equation Coefficients:
DC: 0, 1, 1000
PC Board: 0, 0.1, 0
CPU: 0, 0.1, 0
Ambient: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)