This is the latest recevied telemetry packets stored in our database for station/object 9M2JHZ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | HDOP* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764303690 | 4.1 V | 30 Pkts | 0.65 % | 0 | 0 |
| 1764296464 | 4.43 V | 41 Pkts | 0.53 % | 0 | 0 |
| 1764296408 | 4.43 V | 43 Pkts | 0.53 % | 0 | 0 |
| 1764296233 | 4.41 V | 41 Pkts | 0.56 % | 0 | 0 |
| 1764266287 | 4.2 V | 45 Pkts | 0.5 % | 0 | 0 |
| 1764265322 | 4.2 V | 48 Pkts | 0.56 % | 0 | 0 |
| 1764265255 | 4.17 V | 48 Pkts | 0.62 % | 0 | 0 |
| 1764265191 | 4.17 V | 48 Pkts | 0.5 % | 0 | 0 |
| 1764265127 | 4.16 V | 48 Pkts | 0.55 % | 0 | 0 |
| 1764265063 | 4.16 V | 48 Pkts | 0.55 % | 0 | 0 |
| 1764264998 | 4.17 V | 48 Pkts | 0.59 % | 0 | 0 |
| 1764264934 | 4.13 V | 47 Pkts | 0.57 % | 0 | 0 |
| 1764264870 | 4.14 V | 48 Pkts | 0.54 % | 0 | 0 |
| 1764264806 | 4.17 V | 48 Pkts | 0.51 % | 0 | 0 |
| 1764264742 | 4.16 V | 47 Pkts | 0.54 % | 0 | 0 |
| 1764264678 | 4.14 V | 45 Pkts | 0.59 % | 0 | 0 |
| 1764264549 | 4.14 V | 48 Pkts | 0.54 % | 0 | 0 |
| 1764264486 | 4.14 V | 47 Pkts | 0.61 % | 0 | 0 |
| 1764264421 | 4.17 V | 47 Pkts | 0.53 % | 0 | 0 |
| 1764264354 | 3.93 V | 47 Pkts | 0.51 % | 0 | 0 |
| 1764264289 | 4.13 V | 46 Pkts | 0.51 % | 0 | 0 |
| 1764264225 | 4.14 V | 46 Pkts | 0.57 % | 0 | 0 |
| 1764264161 | 4.14 V | 46 Pkts | 0.6 % | 0 | 0 |
| 1764227713 | 4.38 V | 38 Pkts | 0.54 % | 0 | 0 |
| 1764227648 | 4.4 V | 38 Pkts | 0.59 % | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
Satellite: 0, 0.01, 0
HDOP: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)