This is the latest recevied telemetry packets stored in our database for station/object W4SDR-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Solar* | Temp* | Sats* | Lock* | Value5* |
|---|---|---|---|---|---|
| 1750188718 | 5.74 Volts | 25 Deg C | 8 | 2 | 1 |
| 1750188656 | 5.74 Volts | 25 Deg C | 8 | 2 | 1 |
| 1750187760 | 5.76 Volts | 27 Deg C | 10 | 2 | 1 |
| 1750187699 | 5.76 Volts | 27 Deg C | 10 | 2 | 1 |
| 1750187640 | 5.76 Volts | 27 Deg C | 10 | 2 | 1 |
| 1750187573 | 5.76 Volts | 27 Deg C | 10 | 2 | 1 |
| 1750187515 | 5.76 Volts | 27 Deg C | 10 | 2 | 1 |
| 1750187462 | 5.76 Volts | 27 Deg C | 10 | 2 | 1 |
| 1750187421 | 5.76 Volts | 27 Deg C | 10 | 2 | 1 |
| 1750187421 | 5.76 Volts | 27 Deg C | 10 | 2 | 1 |
| 1750187275 | 5.76 Volts | 27 Deg C | 10 | 2 | 1 |
| 1750187219 | 5.76 Volts | 27 Deg C | 9 | 2 | 1 |
| 1750187155 | 5.76 Volts | 27 Deg C | 9 | 2 | 1 |
| 1750187098 | 5.76 Volts | 27 Deg C | 9 | 2 | 1 |
| 1750187038 | 5.76 Volts | 27 Deg C | 9 | 2 | 1 |
| 1750186979 | 5.76 Volts | 26 Deg C | 9 | 2 | 1 |
| 1750186918 | 5.76 Volts | 26 Deg C | 9 | 1 | 1 |
| 1750186860 | 5.76 Volts | 27 Deg C | 8 | 1 | 1 |
| 1750186802 | 5.76 Volts | 27 Deg C | 9 | 1 | 1 |
| 1750186736 | 5.76 Volts | 27 Deg C | 9 | 1 | 1 |
| 1750186679 | 5.76 Volts | 27 Deg C | 9 | 1 | 1 |
| 1750186194 | 5.72 Volts | 27 Deg C | 11 | 2 | 1 |
| 1750186142 | 5.72 Volts | 27 Deg C | 11 | 2 | 1 |
| 1750185073 | 5.54 Volts | 22 Deg C | 10 | 1 | 1 |
| 1750184515 | 5.36 Volts | 13 Deg C | 9 | 2 | 1 |
*Used Equation Coefficients:
Solar: 0, 0.01, 0
Temp: 0, 1, -273
Sats: 0, 1, 0
Lock: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)