This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761794122 | 641 Count | 593 Count | 184 Count | 4.16 VDC | 0.14 VDC |
| 1761792316 | 638 Count | 590 Count | 183 Count | 4.23 VDC | 0.14 VDC |
| 1761790511 | 635 Count | 587 Count | 182 Count | 4.22 VDC | 0.14 VDC |
| 1761788705 | 632 Count | 584 Count | 181 Count | 4.16 VDC | 0.14 VDC |
| 1761786965 | 625 Count | 580 Count | 180 Count | 4.19 VDC | 0.14 VDC |
| 1761785160 | 622 Count | 577 Count | 179 Count | 4.18 VDC | 0.14 VDC |
| 1761783354 | 619 Count | 574 Count | 178 Count | 4.19 VDC | 0.14 VDC |
| 1761781548 | 616 Count | 571 Count | 177 Count | 4.23 VDC | 0.14 VDC |
| 1761779743 | 613 Count | 568 Count | 176 Count | 4.15 VDC | 0.14 VDC |
| 1761777937 | 610 Count | 565 Count | 175 Count | 4.15 VDC | 0.14 VDC |
| 1761776132 | 607 Count | 562 Count | 174 Count | 4.17 VDC | 0.14 VDC |
| 1761774326 | 604 Count | 559 Count | 173 Count | 4.15 VDC | 0.14 VDC |
| 1761772520 | 601 Count | 556 Count | 172 Count | 4.19 VDC | 0.14 VDC |
| 1761770715 | 598 Count | 553 Count | 171 Count | 4.25 VDC | 0.14 VDC |
| 1761768909 | 595 Count | 551 Count | 170 Count | 4.16 VDC | 0.14 VDC |
| 1761767104 | 593 Count | 549 Count | 170 Count | 4.22 VDC | 0.14 VDC |
| 1761765366 | 587 Count | 546 Count | 170 Count | 4.22 VDC | 0.14 VDC |
| 1761763561 | 584 Count | 543 Count | 169 Count | 4.17 VDC | 0.14 VDC |
| 1761761755 | 581 Count | 540 Count | 168 Count | 4.19 VDC | 0.14 VDC |
| 1761759949 | 578 Count | 537 Count | 167 Count | 4.19 VDC | 0.14 VDC |
| 1761758144 | 575 Count | 534 Count | 166 Count | 4.2 VDC | 0.14 VDC |
| 1761756338 | 572 Count | 531 Count | 165 Count | 4.24 VDC | 0.14 VDC |
| 1761754532 | 569 Count | 528 Count | 164 Count | 4.23 VDC | 0.14 VDC |
| 1761752726 | 566 Count | 525 Count | 163 Count | 4.21 VDC | 0.14 VDC |
| 1761750921 | 563 Count | 522 Count | 162 Count | 4.17 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)