This is the latest recevied telemetry packets stored in our database for station/object EA6ADB-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749333260 | 10 | 24.8 | 3.7 | 220 | 0 |
| 1749332600 | 10 | 24.6 | 3.73 | 220 | 0 |
| 1749331720 | 10 | 24.6 | 3.75 | 220 | 0 |
| 1749331280 | 8 | 24.8 | 3.76 | 220 | 0 |
| 1749330624 | 9 | 25.1 | 3.77 | 220 | 0 |
| 1749330184 | 9 | 25.7 | 3.8 | 220 | 0 |
| 1749329961 | 9 | 25.8 | 3.79 | 220 | 0 |
| 1749329520 | 8 | 25.9 | 3.8 | 210 | 0 |
| 1749329304 | 8 | 25.9 | 3.81 | 220 | 0 |
| 1749329082 | 8 | 26 | 3.83 | 220 | 0 |
| 1749328860 | 9 | 26 | 3.82 | 220 | 0 |
| 1749328642 | 9 | 26 | 3.82 | 220 | 0 |
| 1749328424 | 8 | 26 | 3.85 | 210 | 0 |
| 1749327981 | 6 | 26.1 | 3.84 | 220 | 0 |
| 1749327322 | 7 | 26.3 | 3.87 | 210 | 0 |
| 1749327102 | 7 | 26.5 | 3.87 | 210 | 0 |
| 1749326881 | 7 | 26.6 | 3.87 | 210 | 0 |
| 1749326220 | 6 | 27 | 3.9 | 210 | 0 |
| 1749326000 | 6 | 27.1 | 3.9 | 210 | 0 |
| 1749325326 | 7 | 27.6 | 3.95 | 210 | 0 |
| 1749324638 | 8 | 29 | 3.95 | 210 | 0 |
| 1749324156 | 7 | 30.2 | 3.98 | 210 | 0 |
| 1749323930 | 8 | 31.3 | 3.99 | 210 | 0 |
| 1749323709 | 8 | 32.6 | 4 | 210 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 0.1, -50
Value3: 0, 0.01, 0
Value4: 0, 10, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)