This is the latest recevied telemetry packets stored in our database for station/object W0DLK-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Solar* | Temp* | Sats* | Lock* | Value5* |
|---|---|---|---|---|---|
| 1750029308 | 4.5 Volts | -19 Deg C | 8 | 1 | 1 |
| 1750029188 | 4.64 Volts | -17 Deg C | 9 | 1 | 1 |
| 1750029068 | 4.68 Volts | -11 Deg C | 9 | 1 | 1 |
| 1750028948 | 4.72 Volts | -14 Deg C | 9 | 1 | 1 |
| 1750028705 | 4.8 Volts | -11 Deg C | 10 | 1 | 1 |
| 1750028585 | 4.42 Volts | -11 Deg C | 10 | 1 | 1 |
| 1750028465 | 4.44 Volts | -8 Deg C | 10 | 0 | 1 |
| 1750028345 | 4.78 Volts | -11 Deg C | 9 | 1 | 1 |
| 1750028225 | 4.54 Volts | -10 Deg C | 10 | 1 | 1 |
| 1750028105 | 4.74 Volts | -12 Deg C | 9 | 1 | 1 |
| 1750027985 | 4.8 Volts | -9 Deg C | 9 | 1 | 1 |
| 1750027865 | 4.66 Volts | -13 Deg C | 9 | 1 | 1 |
| 1750027745 | 4.68 Volts | -13 Deg C | 9 | 1 | 1 |
| 1750027625 | 4.52 Volts | -11 Deg C | 9 | 1 | 1 |
| 1750027505 | 4.76 Volts | -7 Deg C | 8 | 1 | 1 |
| 1750027385 | 4.72 Volts | -16 Deg C | 7 | 1 | 1 |
| 1750027265 | 4.4 Volts | -11 Deg C | 0 | 0 | 1 |
| 1750027082 | 4.7 Volts | -8 Deg C | 8 | 1 | 1 |
| 1750026962 | 4.18 Volts | -3 Deg C | 7 | 1 | 1 |
| 1750026746 | 4.66 Volts | -5 Deg C | 6 | 1 | 1 |
| 1750026626 | 4.74 Volts | -15 Deg C | 8 | 1 | 1 |
| 1750026506 | 4.82 Volts | -20 Deg C | 6 | 1 | 1 |
| 1750026383 | 4.72 Volts | -12 Deg C | 7 | 1 | 1 |
| 1750026263 | 4.64 Volts | -8 Deg C | 7 | 1 | 1 |
| 1750026059 | 4.74 Volts | -19 Deg C | 8 | 1 | 1 |
*Used Equation Coefficients:
Solar: 0, 0.01, 0
Temp: 0, 1, -273
Sats: 0, 1, 0
Lock: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)