This is the latest recevied telemetry packets stored in our database for station/object S56IAR-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satelites* | Battery* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 08/01/2025 9:32:41 AM+00:00 | 17 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 9:27:41 AM+00:00 | 18 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 9:22:36 AM+00:00 | 18 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 9:17:36 AM+00:00 | 18 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 9:12:36 AM+00:00 | 17 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 9:07:36 AM+00:00 | 17 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 9:02:36 AM+00:00 | 16 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 8:57:36 AM+00:00 | 16 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 8:52:36 AM+00:00 | 15 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 8:47:36 AM+00:00 | 15 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 8:42:35 AM+00:00 | 15 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 8:37:36 AM+00:00 | 15 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 8:32:35 AM+00:00 | 15 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 8:27:35 AM+00:00 | 14 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 8:22:36 AM+00:00 | 14 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 8:17:37 AM+00:00 | 14 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 8:12:35 AM+00:00 | 14 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 8:07:35 AM+00:00 | 14 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 8:02:37 AM+00:00 | 14 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 7:57:37 AM+00:00 | 14 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 7:52:36 AM+00:00 | 6 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 7:47:36 AM+00:00 | 14 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 7:42:36 AM+00:00 | 5 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 7:37:36 AM+00:00 | 15 Nr | 13 Vdc | 0 | 0 | 0 |
| 08/01/2025 7:32:36 AM+00:00 | 5 Nr | 13 Vdc | 0 | 0 | 0 |
*Used Equation Coefficients:
Satelites: 0, 1, 0
Battery: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)