This is the latest recevied telemetry packets stored in our database for station/object EA6ADB-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1758024861 | 7 | 29.5 C | 4.15 V | 440 M | 0 |
| 1758024541 | 7 | 29.6 C | 4.15 V | 510 M | 0 |
| 1758024381 | 7 | 29.6 C | 4.16 V | 410 M | 0 |
| 1758024221 | 9 | 29.7 C | 4.16 V | 380 M | 0 |
| 1758024061 | 8 | 29.8 C | 4.16 V | 350 M | 0 |
| 1758023901 | 7 | 29.8 C | 4.16 V | 320 M | 0 |
| 1758023741 | 8 | 29.8 C | 4.16 V | 330 M | 0 |
| 1758023581 | 8 | 29.9 C | 4.17 V | 330 M | 0 |
| 1758023421 | 8 | 30 C | 4.17 V | 350 M | 0 |
| 1758023261 | 7 | 30 C | 4.18 V | 470 M | 0 |
| 1758021851 | 6 | 30.7 C | 4.2 V | 600 M | 0 |
| 1758021543 | 7 | 31 C | 4.2 V | 570 M | 0 |
| 1758021380 | 7 | 30.8 C | 4.2 V | 550 M | 0 |
| 1758021207 | 6 | 30.1 C | 4.2 V | 560 M | 0 |
| 1758020906 | 7 | 30.4 C | 4.2 V | 510 M | 0 |
| 1758020746 | 7 | 30.6 C | 4.2 V | 450 M | 0 |
| 1758020586 | 6 | 30.3 C | 4.2 V | 470 M | 0 |
| 1758020104 | 7 | 29.1 C | 4.2 V | 480 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)