This is the latest recevied telemetry packets stored in our database for station/object SP6ICO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1752959904 | 371 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1752958101 | 370 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1752956299 | 369 Count | 0 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1752954495 | 368 Count | 0 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1752952691 | 367 Count | 0 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1752950889 | 366 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1752949086 | 365 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1752947282 | 364 Count | 0 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1752945480 | 363 Count | 0 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1752943677 | 362 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1752941906 | 361 Count | 0 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1752940103 | 360 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1752938301 | 359 Count | 0 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1752936498 | 358 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1752934695 | 357 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1752932892 | 356 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1752931089 | 355 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1752929286 | 354 Count | 0 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1752927483 | 353 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1752925681 | 352 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1752923878 | 351 Count | 0 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1752922075 | 350 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1752920439 | 349 Count | 0 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1752918636 | 348 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1752916833 | 347 Count | 0 Count | 0 Count | 4.16 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)