This is the latest recevied telemetry packets stored in our database for station/object KK7LLM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762216575 | 450 Volts | 623 Deg.F | 308 | 0 | 0 |
| 1762216546 | 449 Volts | 623 Deg.F | 317 | 0 | 0 |
| 1762216539 | 454 Volts | 623 Deg.F | 319 | 0 | 0 |
| 1762216487 | 450 Volts | 622 Deg.F | 328 | 0 | 0 |
| 1762216338 | 457 Volts | 622 Deg.F | 324 | 0 | 0 |
| 1762216173 | 457 Volts | 619 Deg.F | 329 | 0 | 0 |
| 1762216058 | 458 Volts | 614 Deg.F | 331 | 0 | 0 |
| 1762216049 | 455 Volts | 614 Deg.F | 325 | 0 | 0 |
| 1762216015 | 450 Volts | 612 Deg.F | 333 | 0 | 0 |
| 1762215990 | 447 Volts | 612 Deg.F | 334 | 0 | 0 |
| 1762215969 | 451 Volts | 611 Deg.F | 341 | 0 | 0 |
| 1762212920 | 444 Volts | 639 Deg.F | 295 | 0 | 0 |
| 1762212832 | 449 Volts | 639 Deg.F | 306 | 0 | 0 |
| 1762212529 | 449 Volts | 639 Deg.F | 293 | 0 | 0 |
| 1762212520 | 448 Volts | 639 Deg.F | 305 | 0 | 0 |
| 1762212371 | 449 Volts | 638 Deg.F | 299 | 0 | 0 |
| 1762212352 | 450 Volts | 638 Deg.F | 296 | 0 | 0 |
| 1762212329 | 451 Volts | 637 Deg.F | 307 | 0 | 0 |
| 1762212261 | 445 Volts | 636 Deg.F | 311 | 0 | 0 |
| 1762212254 | 450 Volts | 636 Deg.F | 301 | 0 | 0 |
| 1762212120 | 443 Volts | 636 Deg.F | 301 | 0 | 0 |
| 1762211821 | 456 Volts | 637 Deg.F | 307 | 0 | 0 |
| 1762211702 | 451 Volts | 637 Deg.F | 302 | 0 | 0 |
| 1762211598 | 452 Volts | 636 Deg.F | 301 | 0 | 0 |
| 1762211511 | 460 Volts | 635 Deg.F | 300 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)