This is the latest recevied telemetry packets stored in our database for station/object SP6OOL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757637463 | 83 Count | 727 Count | 0 Count | 4.81 VDC | 0 VDC |
| 1757636562 | 82 Count | 724 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1757635662 | 81 Count | 719 Count | 0 Count | 4.53 VDC | 0 VDC |
| 1757634761 | 80 Count | 716 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1757633860 | 79 Count | 712 Count | 0 Count | 4.4 VDC | 0 VDC |
| 1757632973 | 78 Count | 710 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1757632072 | 77 Count | 706 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1757631172 | 76 Count | 703 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1757630271 | 75 Count | 684 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1757629371 | 74 Count | 665 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1757628470 | 73 Count | 635 Count | 0 Count | 4.48 VDC | 0 VDC |
| 1757627569 | 72 Count | 623 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1757626669 | 71 Count | 615 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1757625768 | 70 Count | 608 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1757624868 | 69 Count | 599 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1757623967 | 68 Count | 591 Count | 0 Count | 4.48 VDC | 0 VDC |
| 1757623066 | 67 Count | 565 Count | 0 Count | 4.42 VDC | 0 VDC |
| 1757622166 | 66 Count | 545 Count | 0 Count | 4.75 VDC | 0 VDC |
| 1757621265 | 65 Count | 519 Count | 0 Count | 4.48 VDC | 0 VDC |
| 1757620365 | 64 Count | 495 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1757619464 | 63 Count | 465 Count | 0 Count | 4.73 VDC | 0 VDC |
| 1757618563 | 62 Count | 446 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1757617663 | 61 Count | 443 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1757616762 | 60 Count | 441 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1757615862 | 59 Count | 438 Count | 0 Count | 4.43 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)