This is the latest recevied telemetry packets stored in our database for station/object SP9UOB-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | voltage* | sat* | temp* | solar* | p. altitude* |
|---|---|---|---|---|---|
| 1750696557 | 3.06 V | 7 | 0.4 C | -80 C | -100 m/s |
| 1750696507 | 3.05 V | 7 | 0.4 C | -80 C | -100 m/s |
| 1750696473 | 3.05 V | 7 | 0.4 C | -80 C | -100 m/s |
| 1750696440 | 3.05 V | 7 | 0.4 C | -80 C | -100 m/s |
| 1750696405 | 3.04 V | 7 | 0.4 C | -80 C | -100 m/s |
| 1750696372 | 3.04 V | 7 | 0.4 C | -80 C | -100 m/s |
| 1750696305 | 3.04 V | 6 | 0.38 C | -80 C | -100 m/s |
| 1750696271 | 3.03 V | 5 | 0.38 C | -80 C | -100 m/s |
| 1750696238 | 3.03 V | 6 | 0.38 C | -80 C | -100 m/s |
| 1750696203 | 3.03 V | 6 | 0.38 C | -80 C | -100 m/s |
| 1750696155 | 3.04 V | 5 | 0.38 C | -80 C | -100 m/s |
| 1750696121 | 3.02 V | 5 | 0.38 C | -80 C | -100 m/s |
| 1750696088 | 3.06 V | 4 | 0.38 C | -80 C | -100 m/s |
| 1750696054 | 3.06 V | 5 | 0.38 C | -80 C | -100 m/s |
| 1750696021 | 3.07 V | 5 | 0.38 C | -80 C | -100 m/s |
| 1750695986 | 3.07 V | 5 | 0.38 C | -80 C | -100 m/s |
| 1750695954 | 3.11 V | 4 | 0.36 C | -80 C | -100 m/s |
| 1750695919 | 3.11 V | 4 | 0.36 C | -80 C | -100 m/s |
| 1750695886 | 3.13 V | 4 | 0.36 C | -80 C | -100 m/s |
| 1750695852 | 3.13 V | 4 | 0.36 C | -80 C | -100 m/s |
| 1750695819 | 3.17 V | 4 | 0.36 C | -80 C | -100 m/s |
| 1750695770 | 3.15 V | 9 | 0.34 C | -80 C | -100 m/s |
| 1750695737 | 3.19 V | 9 | 0.34 C | -80 C | -100 m/s |
| 1750695692 | 3.25 V | 9 | 0.34 C | -80 C | -100 m/s |
| 1750695653 | 3.37 V | 9 | 0.32 C | -80 C | -100 m/s |
*Used Equation Coefficients:
voltage: 0, 0.001, 0
sat: 0, 1, 0
temp: 0, 0.02, -80
solar: 0, 0.02, -80
p. altitude: 0, 0.1, -100
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)