This is the latest recevied telemetry packets stored in our database for station/object DL7MU-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satelites* | Battery* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1761923441 | 13 Nr | 13.59 Vdc | 0 | 0 | 0 |
| 1761923416 | 13 Nr | 13.59 Vdc | 0 | 0 | 0 |
| 1761923406 | 13 Nr | 13.62 Vdc | 0 | 0 | 0 |
| 1761923391 | 13 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1761923371 | 13 Nr | 13.48 Vdc | 0 | 0 | 0 |
| 1761923361 | 13 Nr | 13.64 Vdc | 0 | 0 | 0 |
| 1761923351 | 13 Nr | 13.62 Vdc | 0 | 0 | 0 |
| 1761923336 | 13 Nr | 13.68 Vdc | 0 | 0 | 0 |
| 1761923321 | 13 Nr | 13.62 Vdc | 0 | 0 | 0 |
| 1761923311 | 13 Nr | 13.64 Vdc | 0 | 0 | 0 |
| 1761923221 | 13 Nr | 13.59 Vdc | 0 | 0 | 0 |
| 1761923201 | 13 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1761923186 | 13 Nr | 13.69 Vdc | 0 | 0 | 0 |
| 1761923151 | 13 Nr | 13.52 Vdc | 0 | 0 | 0 |
| 1761923141 | 12 Nr | 13.69 Vdc | 0 | 0 | 0 |
| 1761923117 | 12 Nr | 13.54 Vdc | 0 | 0 | 0 |
| 1761923106 | 12 Nr | 13.55 Vdc | 0 | 0 | 0 |
| 1761923091 | 13 Nr | 13.54 Vdc | 0 | 0 | 0 |
| 1761923061 | 13 Nr | 13.46 Vdc | 0 | 0 | 0 |
| 1761923036 | 13 Nr | 13.5 Vdc | 0 | 0 | 0 |
| 1761922977 | 13 Nr | 13.64 Vdc | 0 | 0 | 0 |
| 1761922926 | 12 Nr | 13.57 Vdc | 0 | 0 | 0 |
| 1761922916 | 12 Nr | 13.52 Vdc | 0 | 0 | 0 |
| 1761922811 | 13 Nr | 13.66 Vdc | 0 | 0 | 0 |
| 1761922801 | 13 Nr | 13.66 Vdc | 0 | 0 | 0 |
*Used Equation Coefficients:
Satelites: 0, 1, 0
Battery: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)