This is the latest recevied telemetry packets stored in our database for station/object SQ1JKB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764275677 | 456 Count | 2 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1764273874 | 455 Count | 2 Count | 0 Count | 4.12 VDC | 0.14 VDC |
| 1764272071 | 454 Count | 2 Count | 0 Count | 4.09 VDC | 0.14 VDC |
| 1764270268 | 453 Count | 2 Count | 0 Count | 4.13 VDC | 0.14 VDC |
| 1764268466 | 452 Count | 2 Count | 0 Count | 4.08 VDC | 0.14 VDC |
| 1764266663 | 451 Count | 2 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1764264860 | 450 Count | 2 Count | 0 Count | 4.12 VDC | 0.14 VDC |
| 1764263057 | 449 Count | 2 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1764261254 | 448 Count | 2 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1764259451 | 447 Count | 2 Count | 0 Count | 4.08 VDC | 0.14 VDC |
| 1764257648 | 446 Count | 2 Count | 0 Count | 4.12 VDC | 0.14 VDC |
| 1764255879 | 445 Count | 2 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1764254076 | 444 Count | 2 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1764252274 | 443 Count | 2 Count | 0 Count | 4.07 VDC | 0.14 VDC |
| 1764250471 | 442 Count | 2 Count | 0 Count | 4.07 VDC | 0.14 VDC |
| 1764248668 | 441 Count | 2 Count | 0 Count | 4.07 VDC | 0.14 VDC |
| 1764246865 | 440 Count | 2 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1764245061 | 439 Count | 2 Count | 0 Count | 4.1 VDC | 0.14 VDC |
| 1764243259 | 438 Count | 2 Count | 0 Count | 4.07 VDC | 0.14 VDC |
| 1764241456 | 437 Count | 2 Count | 0 Count | 4.06 VDC | 0.14 VDC |
| 1764239653 | 436 Count | 2 Count | 0 Count | 4.06 VDC | 0.14 VDC |
| 1764237850 | 435 Count | 2 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1764236047 | 434 Count | 2 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1764234279 | 433 Count | 2 Count | 0 Count | 4.12 VDC | 0.14 VDC |
| 1764232477 | 432 Count | 2 Count | 0 Count | 4.13 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)