This is the latest recevied telemetry packets stored in our database for station/object VK4XSS-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768873803 | 0 | 0 | 1039 | 4 | 0 |
| 1768873321 | 3 | 15 | 675 | 0 | 0 |
| 1768873081 | 3 | 90 | 2256 | 0 | 0 |
| 1768872839 | 3 | 102 | 2467 | 0 | 0 |
| 1768872598 | 3 | 102 | 2053 | 0 | 0 |
| 1768872358 | 3 | 103 | 2577 | 0 | 0 |
| 1768872117 | 3 | 104 | 2100 | 0 | 0 |
| 1768871875 | 3 | 104 | 2595 | 0 | 0 |
| 1768871393 | 3 | 104 | 2591 | 0 | 0 |
| 1768871156 | 3 | 104 | 2591 | 0 | 0 |
| 1768870911 | 3 | 103 | 2068 | 0 | 0 |
| 1768870670 | 3 | 103 | 2076 | 0 | 0 |
| 1768870430 | 3 | 103 | 2088 | 0 | 0 |
| 1768870188 | 3 | 103 | 2578 | 0 | 0 |
| 1768869948 | 3 | 104 | 2413 | 0 | 0 |
| 1768869706 | 3 | 105 | 2637 | 0 | 0 |
| 1768869465 | 3 | 104 | 2618 | 0 | 0 |
| 1768868982 | 3 | 105 | 2609 | 0 | 0 |
| 1768868743 | 3 | 104 | 2520 | 0 | 0 |
| 1768868502 | 3 | 104 | 2599 | 0 | 0 |
| 1768868260 | 3 | 100 | 2018 | 0 | 0 |
| 1768868019 | 3 | 102 | 2066 | 0 | 0 |
| 1768867778 | 3 | 105 | 2696 | 0 | 0 |
| 1768867538 | 3 | 104 | 2565 | 0 | 0 |
| 1768867296 | 3 | 102 | 2066 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)