This is the latest recevied telemetry packets stored in our database for station/object SQ3MQD-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1749288674 | 260 Count | 37 Count | 11 Count | 5.11 VDC | 0.08 VDC |
| 1749287773 | 259 Count | 37 Count | 11 Count | 5.15 VDC | 0.08 VDC |
| 1749286872 | 258 Count | 37 Count | 11 Count | 5.06 VDC | 0.08 VDC |
| 1749285970 | 257 Count | 37 Count | 11 Count | 5.07 VDC | 0.08 VDC |
| 1749285069 | 256 Count | 37 Count | 11 Count | 5.05 VDC | 0.08 VDC |
| 1749284168 | 255 Count | 37 Count | 11 Count | 5.15 VDC | 0.08 VDC |
| 1749283267 | 254 Count | 37 Count | 11 Count | 5.05 VDC | 0.08 VDC |
| 1749217297 | 253 Count | 37 Count | 11 Count | 5.15 VDC | 0.08 VDC |
| 1749216396 | 252 Count | 37 Count | 11 Count | 5.05 VDC | 0.08 VDC |
| 1749215494 | 251 Count | 37 Count | 11 Count | 5.06 VDC | 0.08 VDC |
| 1749214593 | 250 Count | 37 Count | 11 Count | 5.1 VDC | 0.08 VDC |
| 1749213692 | 249 Count | 37 Count | 11 Count | 5.06 VDC | 0.08 VDC |
| 1749212791 | 248 Count | 37 Count | 11 Count | 5.15 VDC | 0.08 VDC |
| 1749211889 | 247 Count | 37 Count | 11 Count | 5.15 VDC | 0.08 VDC |
| 1749210988 | 246 Count | 37 Count | 11 Count | 5.15 VDC | 0.08 VDC |
| 1749210087 | 245 Count | 37 Count | 11 Count | 5.15 VDC | 0.08 VDC |
| 1749209185 | 244 Count | 37 Count | 11 Count | 5.15 VDC | 0.08 VDC |
| 1749208284 | 243 Count | 37 Count | 11 Count | 5.15 VDC | 0.08 VDC |
| 1749207383 | 242 Count | 37 Count | 11 Count | 5.15 VDC | 0.08 VDC |
| 1749206482 | 241 Count | 37 Count | 11 Count | 5.06 VDC | 0.08 VDC |
| 1749205580 | 240 Count | 37 Count | 11 Count | 5.15 VDC | 0.08 VDC |
| 1749204679 | 239 Count | 37 Count | 11 Count | 5.06 VDC | 0.08 VDC |
| 1749203778 | 238 Count | 37 Count | 11 Count | 5.15 VDC | 0.08 VDC |
| 1749202877 | 237 Count | 37 Count | 11 Count | 5.06 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)