This is the latest recevied telemetry packets stored in our database for station/object DL1PJO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1747563303 | 4.97 VDC | 0 | 0 | 0 | 0 |
| 1747562402 | 4.3 VDC | 0 | 0 | 0 | 0 |
| 1747561918 | 4.87 VDC | 0 | 0 | 0 | 0 |
| 1747561018 | 4.33 VDC | 0 | 0 | 0 | 0 |
| 1747560118 | 4.67 VDC | 0 | 0 | 0 | 0 |
| 1747559218 | 4.43 VDC | 0 | 0 | 0 | 0 |
| 1747558318 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1747557417 | 4.37 VDC | 0 | 0 | 0 | 0 |
| 1747556517 | 4.48 VDC | 0 | 0 | 0 | 0 |
| 1747555617 | 4.7 VDC | 0 | 0 | 0 | 0 |
| 1747554717 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1747553817 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1747552917 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1747552017 | 4.8 VDC | 0 | 0 | 0 | 0 |
| 1747551117 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1747550217 | 4.24 VDC | 0 | 0 | 0 | 0 |
| 1747549317 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1747548416 | 4.65 VDC | 0 | 0 | 0 | 0 |
| 1747547516 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1747546616 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1747545716 | 4.55 VDC | 0 | 0 | 0 | 0 |
| 1747544816 | 4.66 VDC | 0 | 0 | 0 | 0 |
| 1747543916 | 4.92 VDC | 0 | 0 | 0 | 0 |
| 1747543016 | 4.61 VDC | 0 | 0 | 0 | 0 |
| 1747542116 | 4.67 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)