This is the latest recevied telemetry packets stored in our database for station/object DL5SMB-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satelites* | Battery* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1748845012 | 14 Nr | 13.87 Vdc | 0 | 0 | 0 |
| 1748844882 | 14 Nr | 13.91 Vdc | 0 | 0 | 0 |
| 1748844852 | 14 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1748844797 | 14 Nr | 13.95 Vdc | 0 | 0 | 0 |
| 1748844777 | 14 Nr | 13.91 Vdc | 0 | 0 | 0 |
| 1748844732 | 14 Nr | 13.95 Vdc | 0 | 0 | 0 |
| 1748844717 | 14 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1748844702 | 14 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1748844687 | 14 Nr | 13.91 Vdc | 0 | 0 | 0 |
| 1748844672 | 14 Nr | 13.91 Vdc | 0 | 0 | 0 |
| 1748844657 | 14 Nr | 13.91 Vdc | 0 | 0 | 0 |
| 1748844627 | 14 Nr | 13.91 Vdc | 0 | 0 | 0 |
| 1748844572 | 15 Nr | 13.91 Vdc | 0 | 0 | 0 |
| 1748844547 | 15 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1748844522 | 15 Nr | 13.93 Vdc | 0 | 0 | 0 |
| 1748844347 | 14 Nr | 13.94 Vdc | 0 | 0 | 0 |
| 1748844317 | 13 Nr | 13.95 Vdc | 0 | 0 | 0 |
| 1748794986 | 14 Nr | 13.28 Vdc | 0 | 0 | 0 |
| 1748794856 | 14 Nr | 13.73 Vdc | 0 | 0 | 0 |
| 1748794821 | 14 Nr | 13.75 Vdc | 0 | 0 | 0 |
| 1748794801 | 13 Nr | 13.77 Vdc | 0 | 0 | 0 |
| 1748794781 | 13 Nr | 13.75 Vdc | 0 | 0 | 0 |
| 1748794761 | 13 Nr | 13.77 Vdc | 0 | 0 | 0 |
| 1748794746 | 13 Nr | 13.77 Vdc | 0 | 0 | 0 |
| 1748794646 | 13 Nr | 13.77 Vdc | 0 | 0 | 0 |
*Used Equation Coefficients:
Satelites: 0, 1, 0
Battery: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)