This is the latest recevied telemetry packets stored in our database for station/object EA5JKT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761939131 | 3 Count | 533 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1761909136 | 2 Count | 533 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1761907332 | 1 Count | 272 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1761905529 | 0 Count | 0 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1761904111 | 4 Count | 923 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1761902307 | 3 Count | 641 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1761900504 | 2 Count | 414 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1761900160 | 1 Count | 377 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1761898356 | 0 Count | 164 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1761896553 | 4 Count | 1041 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1761894749 | 3 Count | 875 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1761892946 | 2 Count | 712 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1761891142 | 1 Count | 459 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1761889339 | 0 Count | 235 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1761887535 | 5 Count | 1126 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1761885731 | 4 Count | 913 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1761883928 | 3 Count | 681 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1761882167 | 2 Count | 445 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1761880364 | 1 Count | 219 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1761878560 | 9 Count | 1047 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1761876757 | 7 Count | 846 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1761874953 | 5 Count | 644 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1761873150 | 3 Count | 424 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1761871346 | 1 Count | 227 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1761869542 | 4 Count | 1167 Count | 0 Count | 4.2 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)