This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1770097754 | 4 V | 0 V | 176 mW | 28.1 degC | 100737.5 Pa |
| 1770097693 | 4 V | 0 V | 150 mW | 28.1 degC | 100737.5 Pa |
| 1770097691 | 4 V | 0 V | 142 mW | 27.9 degC | 100725 Pa |
| 1770097631 | 4 V | 0 V | 168 mW | 28 degC | 100725 Pa |
| 1770097573 | 4 V | 0 V | 142 mW | 27.8 degC | 100725 Pa |
| 1770097511 | 4 V | 0 V | 140 mW | 27.9 degC | 100725 Pa |
| 1770097451 | 4 V | 0 V | 140 mW | 27.9 degC | 100725 Pa |
| 1770097391 | 4 V | 0 V | 192 mW | 28.1 degC | 100725 Pa |
| 1770097339 | 4 V | 0 V | 154 mW | 28.4 degC | 100737.5 Pa |
| 1770097330 | 4 V | 0 V | 138 mW | 27.8 degC | 100725 Pa |
| 1770097271 | 4 V | 0 V | 148 mW | 27.9 degC | 100725 Pa |
| 1770097212 | 4 V | 0 V | 164 mW | 28.1 degC | 100725 Pa |
| 1770097151 | 4 V | 0 V | 142 mW | 27.8 degC | 100737.5 Pa |
| 1770097091 | 4 V | 0 V | 140 mW | 27.8 degC | 100737.5 Pa |
| 1770097031 | 4 V | 0 V | 168 mW | 27.9 degC | 100737.5 Pa |
| 1770096973 | 4 V | 0 V | 150 mW | 28 degC | 100737.5 Pa |
| 1770096971 | 4 V | 0 V | 142 mW | 27.8 degC | 100737.5 Pa |
| 1770096911 | 4 V | 0 V | 138 mW | 27.8 degC | 100737.5 Pa |
| 1770096851 | 4 V | 0 V | 168 mW | 28.1 degC | 100737.5 Pa |
| 1770096791 | 4 V | 0 V | 142 mW | 27.7 degC | 100737.5 Pa |
| 1770096731 | 4 V | 0 V | 142 mW | 27.8 degC | 100737.5 Pa |
| 1770096671 | 4 V | 0 V | 172 mW | 27.8 degC | 100737.5 Pa |
| 1770096613 | 4 V | 0 V | 144 mW | 27.9 degC | 100737.5 Pa |
| 1770096610 | 4 V | 0 V | 130 mW | 27.6 degC | 100737.5 Pa |
| 1770096549 | 4 V | 0 V | 130 mW | 27.6 degC | 100737.5 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)