This is the latest recevied telemetry packets stored in our database for station/object E70SIC-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1747712959 | 4.32 VDC | 0 | 0 | 0 | 0 |
| 1747712059 | 4.33 VDC | 0 | 0 | 0 | 0 |
| 1747711159 | 4.35 VDC | 0 | 0 | 0 | 0 |
| 1747710259 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1747709359 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1747708458 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1747707558 | 4.32 VDC | 0 | 0 | 0 | 0 |
| 1747706658 | 4.31 VDC | 0 | 0 | 0 | 0 |
| 1747705757 | 4.33 VDC | 0 | 0 | 0 | 0 |
| 1747704860 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1747703960 | 4.31 VDC | 0 | 0 | 0 | 0 |
| 1747703059 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1747702159 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1747701259 | 4.31 VDC | 0 | 0 | 0 | 0 |
| 1747700359 | 4.35 VDC | 0 | 0 | 0 | 0 |
| 1747699459 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1747698559 | 4.3 VDC | 0 | 0 | 0 | 0 |
| 1747697659 | 4.31 VDC | 0 | 0 | 0 | 0 |
| 1747696759 | 4.31 VDC | 0 | 0 | 0 | 0 |
| 1747695859 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1747694959 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1747694058 | 4.35 VDC | 0 | 0 | 0 | 0 |
| 1747693158 | 4.31 VDC | 0 | 0 | 0 | 0 |
| 1747692258 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1747691358 | 4.36 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)