This is the latest recevied telemetry packets stored in our database for station/object IW0UTD-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762014913 | 430 | 0 | 0 | 0 | 0 |
| 1762013712 | 430 | 0 | 0 | 0 | 0 |
| 1762012513 | 426 | 0 | 0 | 0 | 0 |
| 1762011312 | 429 | 0 | 0 | 0 | 0 |
| 1762010113 | 422 | 0 | 0 | 0 | 0 |
| 1762008912 | 425 | 0 | 0 | 0 | 0 |
| 1762007712 | 425 | 0 | 0 | 0 | 0 |
| 1762006512 | 426 | 0 | 0 | 0 | 0 |
| 1762005312 | 424 | 0 | 0 | 0 | 0 |
| 1762004111 | 424 | 0 | 0 | 0 | 0 |
| 1762002911 | 429 | 0 | 0 | 0 | 0 |
| 1762001711 | 425 | 0 | 0 | 0 | 0 |
| 1762000516 | 426 | 0 | 0 | 0 | 0 |
| 1761999312 | 426 | 0 | 0 | 0 | 0 |
| 1761998112 | 427 | 0 | 0 | 0 | 0 |
| 1761996912 | 429 | 0 | 0 | 0 | 0 |
| 1761995712 | 422 | 0 | 0 | 0 | 0 |
| 1761994512 | 426 | 0 | 0 | 0 | 0 |
| 1761993312 | 427 | 0 | 0 | 0 | 0 |
| 1761992112 | 429 | 0 | 0 | 0 | 0 |
| 1761990912 | 422 | 0 | 0 | 0 | 0 |
| 1761989711 | 423 | 0 | 0 | 0 | 0 |
| 1761988511 | 423 | 0 | 0 | 0 | 0 |
| 1761987311 | 424 | 0 | 0 | 0 | 0 |
| 1761986111 | 423 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)