This is the latest recevied telemetry packets stored in our database for station/object SP8PB-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777375064 | 406 Count | 676 Count | 233 Count | 0 VDC | 0 VDC |
| 1777374163 | 403 Count | 671 Count | 231 Count | 0 VDC | 0 VDC |
| 1777373262 | 401 Count | 667 Count | 230 Count | 0 VDC | 0 VDC |
| 1777372362 | 398 Count | 662 Count | 228 Count | 0 VDC | 0 VDC |
| 1777371461 | 395 Count | 658 Count | 226 Count | 0 VDC | 0 VDC |
| 1777369865 | 390 Count | 658 Count | 226 Count | 0 VDC | 0 VDC |
| 1777368964 | 387 Count | 653 Count | 224 Count | 0 VDC | 0 VDC |
| 1777368064 | 385 Count | 650 Count | 223 Count | 0 VDC | 0 VDC |
| 1777367163 | 382 Count | 645 Count | 221 Count | 0 VDC | 0 VDC |
| 1777366262 | 380 Count | 641 Count | 220 Count | 0 VDC | 0 VDC |
| 1777365361 | 377 Count | 637 Count | 218 Count | 0 VDC | 0 VDC |
| 1777364461 | 374 Count | 632 Count | 216 Count | 0 VDC | 0 VDC |
| 1777363560 | 372 Count | 629 Count | 215 Count | 0 VDC | 0 VDC |
| 1777362659 | 370 Count | 626 Count | 214 Count | 0 VDC | 0 VDC |
| 1777361758 | 367 Count | 618 Count | 212 Count | 0 VDC | 0 VDC |
| 1777360858 | 364 Count | 614 Count | 210 Count | 0 VDC | 0 VDC |
| 1777359957 | 360 Count | 607 Count | 207 Count | 0 VDC | 0 VDC |
| 1777359056 | 358 Count | 603 Count | 206 Count | 0 VDC | 0 VDC |
| 1777358155 | 356 Count | 599 Count | 205 Count | 0 VDC | 0 VDC |
| 1777357255 | 353 Count | 594 Count | 203 Count | 0 VDC | 0 VDC |
| 1777356354 | 349 Count | 587 Count | 200 Count | 0 VDC | 0 VDC |
| 1777355453 | 346 Count | 581 Count | 198 Count | 0 VDC | 0 VDC |
| 1777354552 | 342 Count | 574 Count | 195 Count | 0 VDC | 0 VDC |
| 1777353652 | 339 Count | 570 Count | 193 Count | 0 VDC | 0 VDC |
| 1777352751 | 336 Count | 565 Count | 191 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)